PartsTable
Technical Data Sheet
PartsTable / O-RING / 10A2235A-1 REV. 3 KEY 11
10A2235A-1 REV. 3 KEY 11 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The 10A2235A-1 REV. 3 KEY 11 is a the manufacturer industrial component. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-546-4716, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10A2235A-1 REV. 3 KEY 11
NSN: 5331-01-546-4716
FSC: 5331 — O-RING
CAGE: 22375 — FISCHER AND PORTER CO (USA)
SPECIFICATIONS
Part Number10A2235A-1 REV. 3 KEY 11
NSN5331-01-546-4716
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10A2235A-1 REV. 3 KEY 11 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER HOLE DIAMETER: 0.732 INCHES MINIMUM AND 0.742 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
•
CRITICALITY CODE JUSTIFICATION: ZZZY
•
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS: CLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
TECHNICAL CHARACTERISTICS (FLIS)
CENTER HOLE DIAMETER0.732 INCHES MINIMUM AND 0.742 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
CRITICALITY CODE JUSTIFICATIONZZZY
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICSCLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
ARP 583-116Interchangeable
interchangeable cross-reference
interchangeable
Y325-116Interchangeable
interchangeable cross-reference
interchangeable
N0674 2-116Interchangeable
interchangeable cross-reference
interchangeable
101A714U01Interchangeable
Same NIIN cross-reference
interchangeable
101A714U01CPInterchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 10A2235A-1 REV. 3 KEY 11?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10A2235A-1 REV. 3 KEY 11?
10A2235A-1 REV. 3 KEY 11 is a 10A2235A-1 REV. 3 KEY 11.
What parts can replace 10A2235A-1 REV. 3 KEY 11?
There are 5 known substitutes for 10A2235A-1 REV. 3 KEY 11: ARP 583-116, Y325-116, N0674 2-116 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 10A2235A-1 REV. 3 KEY 11?
10A2235A-1 REV. 3 KEY 11 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-546-4716. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10A2235A-1 REV. 3 KEY 11

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026