PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 10993-A-1032-2
10993-A-1032-2 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The HANDLE,BOW is a the manufacturer industrial component. Key specifications include color: BLACK HANDLE, material: ALUMINUM ALLOY 6063 OVERALL, overall_length: 6.256 INCHES MINIMUM AND 6.306 INCHES MAXIMUM IN, handle_clearance: 1.933 INCHES MINIMUM AND 2.021 INCHES MAXIMUM IN, surface_treatment: ANODIZE OVERALL, nominal_thread_size: 0.190 INCHES IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-081-1629, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10993-A-1032-2
NSN: 5340-01-081-1629
FSC: 5340
CAGE: 06540 — NEW HAVEN MFG CORP AMATOM ELECTRONIC HARDWARE DIV (USA)
SPECIFICATIONS
colorBLACK HANDLE
materialALUMINUM ALLOY 6063 OVERALL
overall_length6.256 INCHES MINIMUM AND 6.306 INCHES MAXIMUM IN
handle_clearance1.933 INCHES MINIMUM AND 2.021 INCHES MAXIMUM IN
surface_treatmentANODIZE OVERALL
nominal_thread_size0.190 INCHES IN
thread_series_designatorUNF
mounting_facility_quantity2
material_document_and_classificationQQ-A-200/9,T5 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationMIL-A-8625,TYPE 2,CLASS 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
center_to_center_distance_between_mounting_facilities_parallel_to_length5.980 INCHES MINIMUM AND 6.020 INCHES MAXIMUM IN
NSN5340-01-081-1629
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10993-A-1032-2 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH: 5.980 INCHES MINIMUM AND 6.020 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-200/9,T5 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625,TYPE 2,CLASS 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
MATERIAL: ALUMINUM ALLOY 6063 OVERALL
•
THREAD SERIES DESIGNATOR: UNF
•
COLOR: BLACK HANDLE
•
SURFACE TREATMENT: ANODIZE OVERALL
•
HANDLE CLEARANCE: 1.933 INCHES MINIMUM AND 2.021 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH5.980 INCHES MINIMUM AND 6.020 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-200/9,T5 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625,TYPE 2,CLASS 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
MATERIALALUMINUM ALLOY 6063 OVERALL
THREAD SERIES DESIGNATORUNF
COLORBLACK HANDLE
SURFACE TREATMENTANODIZE OVERALL
HANDLE CLEARANCE1.933 INCHES MINIMUM AND 2.021 INCHES MAXIMUM IN
MOUNTING FACILITY QUANTITY2
OVERALL LENGTH6.256 INCHES MINIMUM AND 6.306 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
NASM39087Upgraded Successor
successor cross-reference
successor
40-013603-01Interchangeable
Same NIIN cross-reference
interchangeable
MS39087-412ANInterchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 10993-A-1032-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10993-A-1032-2?
10993-A-1032-2 is a HANDLE,BOW.
What parts can replace 10993-A-1032-2?
There are 3 known substitutes for 10993-A-1032-2: NASM39087, 40-013603-01, MS39087-412AN. Substitute compatibility should be verified for your specific system.
What is the NSN for 10993-A-1032-2?
10993-A-1032-2 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-081-1629. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10993-A-1032-2

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026