PartsTable
Technical Data Sheet
Download PDF

10954246 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

10954246: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: ASBESTOS AND RUBBER CHLOROPRENE CLASS CR OVERALL, hole_diameter: 0.312 INCHES MINIMUM AND 0.328 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 2.624 INCHES NOMINAL IN, style_designator: NON-CIRCULAR, aperture_diameter: 1.375 INCHES MINIMUM AND 1.406 INCHES MAXIMUM IN, bolt_circle_diameter: 2.000 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-908-1612, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10954246
NSN: 5330-00-908-1612
FSC: 5330 — Packing and Gasket Materials
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
materialASBESTOS AND RUBBER CHLOROPRENE CLASS CR OVERALL
hole_diameter0.312 INCHES MINIMUM AND 0.328 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
overall_width2.624 INCHES NOMINAL IN
style_designatorNON-CIRCULAR
aperture_diameter1.375 INCHES MINIMUM AND 1.406 INCHES MAXIMUM IN
bolt_hole_quantity2
bolt_circle_diameter2.000 INCHES NOMINAL IN
outside_corner_radius0.312 INCHES NOMINAL IN
cross-sectional_thickness0.015 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
side_radius_from_gasket_center0.875 INCHES NOMINAL IN
material_document_and_classificationMIL-G-12803,+1253-A MIL SPEC ALL MATERIAL RESPONSES OVERALL
NSN5330-00-908-1612
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10954246 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.015 INCHES NOMINAL IN
•
SIDE RADIUS FROM GASKET CENTER: 0.875 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NON-CIRCULAR
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-12803,+1253-A MIL SPEC ALL MATERIAL RESPONSES OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
APERTURE DIAMETER: 1.375 INCHES MINIMUM AND 1.406 INCHES MAXIMUM IN
•
BOLT HOLE QUANTITY: 2
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.015 INCHES NOMINAL IN
SIDE RADIUS FROM GASKET CENTER0.875 INCHES NOMINAL IN
STYLE DESIGNATORNON-CIRCULAR
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-12803,+1253-A MIL SPEC ALL MATERIAL RESPONSES OVERALL
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OVERALL WIDTH2.624 INCHES NOMINAL IN
APERTURE DIAMETER1.375 INCHES MINIMUM AND 1.406 INCHES MAXIMUM IN
BOLT HOLE QUANTITY2
BOLT CIRCLE DIAMETER2.000 INCHES NOMINAL IN
OUTSIDE CORNER RADIUS0.312 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 10954246?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10954246?
10954246 is a GASKET.
What is the NSN for 10954246?
10954246 is cataloged in the U.S. Government catalog under NSN 5330-00-908-1612. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10954246

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.