PartsTable
Technical Data Sheet
Download PDF

109532 — HOSE ASSEMBLY,NONMETALLIC

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

109532: HOSE ASSEMBLY,NONMETALLIC.

The HOSE ASSEMBLY,NONMETALLIC is a the manufacturer industrial component. Key specifications include part_name_assigned_by_controlling_agency: AIR SPPLY HOSE ASSY. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-281-5398, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
109532
NSN: 5310-00-281-5398
NIINs: 002815398, 016330859
FSC: 5310 — Nuts and Washers
CAGE: 34623 — AM GENERAL LLC (USA)
SPECIFICATIONS
part_name_assigned_by_controlling_agencyAIR SPPLY HOSE ASSY
NSN5310-00-281-5398
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 109532 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.2332 INCHES MINIMUM AND 0.2362 INCHES MAXIMUM IN
•
THREAD SERIES: LOWENHERZ
•
THREAD PITCH DIAMETERS: +0.1201 TO 0.1221 INCHES IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE 72 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 3.5 MILLIMETERS MM
•
NUT HEIGHT: 0.154 INCHES MINIMUM AND 0.162 INCHES MAXIMUM IN
•
SURFACE TREATMENT: CADMIUM OVERALL
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.2332 INCHES MINIMUM AND 0.2362 INCHES MAXIMUM IN
THREAD SERIESLOWENHERZ
THREAD PITCH DIAMETERS+0.1201 TO 0.1221 INCHES IN
MATERIAL DOCUMENT AND CLASSIFICATIONSAE 72 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE3.5 MILLIMETERS MM
NUT HEIGHT0.154 INCHES MINIMUM AND 0.162 INCHES MAXIMUM IN
SURFACE TREATMENTCADMIUM OVERALL
NUT STYLEHEXAGON
MATERIALCOPPER ALLOY 360 OVERALL
SUBSTITUTES & CROSS-REFERENCES 6
175970Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
41132Reference document
Same NSN cross-reference
Reference document — Secondary reference
IB23Reference document
Same NSN cross-reference
Reference document — Secondary reference
17804FReference document
Same NSN cross-reference
Reference document — Secondary reference
R20606Reference document
Same NSN cross-reference
Reference document — Secondary reference
AL23NReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy 109532?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 109532?
109532 is a HOSE ASSEMBLY,NONMETALLIC.
What parts can replace 109532?
There are 6 known substitutes for 109532: 175970, 41132, IB23 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 109532?
109532 is cataloged in the U.S. Government catalog under NSN 5310-00-281-5398. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 109532

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.