PartsTable
Technical Data Sheet
Download PDF

10951514 — PIN,SHOULDER,HEADLESS

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

10951514: PIN,SHOULDER,HEADLESS.

The PIN,SHOULDER,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1015 OVERALL, shank_length: 0.630 INCHES NOMINAL IN, overall_length: 1.500 INCHES NOMINAL IN, shank_diameter: 0.4959 INCHES MINIMUM AND 0.4964 INCHES MAXIMUM IN, undercut_width: 0.060 INCHES NOMINAL IN, first_end_style: CHAMFERED. This part is cataloged in the U.S.

Government catalog under NSN 5315-01-118-3924, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10951514
NSN: 5315-01-118-3924
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
materialSTEEL COMP 1015 OVERALL
shank_length0.630 INCHES NOMINAL IN
overall_length1.500 INCHES NOMINAL IN
shank_diameter0.4959 INCHES MINIMUM AND 0.4964 INCHES MAXIMUM IN
undercut_width0.060 INCHES NOMINAL IN
first_end_styleCHAMFERED
style_designatorUNDERCUT
shoulder_diameter0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
first_end_locationBOTH ENDS
second_shank_length0.620 INCHES NOMINAL IN
first_end_taper_angle45.0 DEGREES NOMINAL
second_shank_diameter1.380 INCHES NOMINAL IN
NSN5315-01-118-3924
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 10951514 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 0.4959 INCHES MINIMUM AND 0.4964 INCHES MAXIMUM IN
•
SECOND SHANK DIAMETER: 1.380 INCHES NOMINAL IN
•
UNDERCUT WIDTH: 0.060 INCHES NOMINAL IN
•
FIRST END TAPER LENGTH: 0.030 INCHES NOMINAL IN
•
FIRST END LOCATION: BOTH ENDS
•
FIRST END STYLE: CHAMFERED
•
SHANK LENGTH: 0.630 INCHES NOMINAL IN
•
STYLE DESIGNATOR: UNDERCUT
TECHNICAL CHARACTERISTICS
SHANK DIAMETER0.4959 INCHES MINIMUM AND 0.4964 INCHES MAXIMUM IN
SECOND SHANK DIAMETER1.380 INCHES NOMINAL IN
UNDERCUT WIDTH0.060 INCHES NOMINAL IN
FIRST END TAPER LENGTH0.030 INCHES NOMINAL IN
FIRST END LOCATIONBOTH ENDS
FIRST END STYLECHAMFERED
SHANK LENGTH0.630 INCHES NOMINAL IN
STYLE DESIGNATORUNDERCUT
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-633 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
OVERALL LENGTH1.500 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Semi-active item — no replacement plannedNo demilitarization required
Ready to buy 10951514?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10951514?
10951514 is a PIN,SHOULDER,HEADLESS.
What is the NSN for 10951514?
10951514 is cataloged in the U.S. Government catalog under NSN 5315-01-118-3924. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10951514