PartsTable
Technical Data Sheet
Download PDF

10948449 — NUT,PLAIN,ROUND

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

10948449: NUT,PLAIN,ROUND.

The NUT,PLAIN,ROUND is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, nut_style: ROUND, nut_diameter: 2.250 INCHES NOMINAL IN, thread_class: 2B, nut_thickness: 0.375 INCHES NOMINAL IN, thread_series: UNEF. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-908-0837, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10948449
NSN: 5310-00-908-0837
FSC: 5310 — Nuts and Washers
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
materialSTEEL OVERALL
nut_styleROUND
nut_diameter2.250 INCHES NOMINAL IN
thread_class2B
nut_thickness0.375 INCHES NOMINAL IN
thread_seriesUNEF
thread_directionRIGHT-HAND
countersink_angle90.0 DEGREES NOMINAL NUT
drive_point_depth0.187 INCHES NOMINAL IN
drive_point_width0.250 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN
surface_treatmentPHOSPHATE ZINC OVERALL
nominal_thread_size1.125 INCHES IN
NSN5310-00-908-0837
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 10948449 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-16232,TY 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD SERIES: UNEF
•
DRIVE POINT WIDTH: 0.250 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 1.125 INCHES IN
•
NUT DIAMETER: 2.250 INCHES NOMINAL IN
•
DRIVE POINT DEPTH: 0.187 INCHES NOMINAL IN
•
NUT THICKNESS: 0.375 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-C-16232,TY 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD SERIESUNEF
DRIVE POINT WIDTH0.250 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE1.125 INCHES IN
NUT DIAMETER2.250 INCHES NOMINAL IN
DRIVE POINT DEPTH0.187 INCHES NOMINAL IN
NUT THICKNESS0.375 INCHES NOMINAL IN
SURFACE TREATMENTPHOSPHATE ZINC OVERALL
COUNTERSINK ANGLE90.0 DEGREES NOMINAL NUT
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 10948449?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10948449?
10948449 is a NUT,PLAIN,ROUND.
What is the NSN for 10948449?
10948449 is cataloged in the U.S. Government catalog under NSN 5310-00-908-0837. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10948449

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.