PartsTable
Technical Data Sheet
Download PDF

10946907-3 — SWAGING SLEEVE,WIRE ROPE

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

10946907-3: SWAGING SLEEVE,WIRE ROPE.

The SWAGING SLEEVE,WIRE ROPE is a the manufacturer industrial component. Key specifications include material: COPPER, overall_width: 0.170 INCHES NOMINAL IN, overall_height: 0.251 INCHES NOMINAL IN, overall_length: 0.375 INCHES NOMINAL IN, style_designator: FIGURE 8, accommodated_material_diameter: 0.093 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-012-2936, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10946907-3
NSN: 5315-00-012-2936
NIINs: 000122936, 008514918
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
materialCOPPER
overall_width0.170 INCHES NOMINAL IN
overall_height0.251 INCHES NOMINAL IN
overall_length0.375 INCHES NOMINAL IN
style_designatorFIGURE 8
accommodated_material_diameter0.093 INCHES MAXIMUM IN
NSN5315-00-012-2936
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 10946907-3 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
HOLE ARRANGEMENT STYLE: DRILLED THRU HEAD
•
UNDER HEAD LENGTH: 2.620 INCHES NOMINAL IN
•
FIRST HOLE DIAMETER: 0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM IN
•
HARDNESS RATING: 35.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
•
STYLE DESIGNATOR: STRAIGHT
•
PIN HEAD DIAMETER: 0.620 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A322 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM A331 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
HOLE ARRANGEMENT STYLEDRILLED THRU HEAD
UNDER HEAD LENGTH2.620 INCHES NOMINAL IN
FIRST HOLE DIAMETER0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM IN
HARDNESS RATING35.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
STYLE DESIGNATORSTRAIGHT
PIN HEAD DIAMETER0.620 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A322 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM A331 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
DIAMETER0.328 INCHES NOMINAL IN
HEAD STYLEFLAT CHAMFER
SUBSTITUTES & CROSS-REFERENCES 1
11604854-2Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 10946907-3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10946907-3?
10946907-3 is a SWAGING SLEEVE,WIRE ROPE.
What parts can replace 10946907-3?
There is 1 known substitute for 10946907-3: 11604854-2. Substitute compatibility should be verified for your specific system.
What is the NSN for 10946907-3?
10946907-3 is cataloged in the U.S. Government catalog under NSN 5315-00-012-2936. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10946907-3

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.