PartsTable
Technical Data Sheet
Download PDF

10937-A-1032-2 — HANDLE,BOW

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

10937-A-1032-2: HANDLE,BOW.

The HANDLE,BOW is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 6061 OVERALL, overall_length: 4.280 INCHES NOMINAL IN, handle_clearance: 1.220 INCHES NOMINAL IN, surface_treatment: ANODIZE OVERALL, nominal_thread_size: 0.190 INCHES IN, thread_series_designator: UNIFIED NATIONAL COARSE (UNC). This part is cataloged in the U.S.

Government catalog under NSN 5340-01-073-9694, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10937-A-1032-2
NSN: 5340-01-073-9694
NIINs: 010739694, 012067670
FSC: 5340 — Hardware, Commercial
CAGE: 1YGB8 — CAREY MANUFACTURING CO, INC DBA AMATOM ELECTRONIC HARDWARE DIV AMATOM ELECTRONIC HARDWARE (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 6061 OVERALL
overall_length4.280 INCHES NOMINAL IN
handle_clearance1.220 INCHES NOMINAL IN
surface_treatmentANODIZE OVERALL
nominal_thread_size0.190 INCHES IN
thread_series_designatorUNIFIED NATIONAL COARSE (UNC)
mounting_facility_quantity2
material_document_and_classificationQQ-A-225/8,T6 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationMIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
center_to_center_distance_between_mounting_facilities_parallel_to_length4.000 INCHES NOMINAL IN
NSN5340-01-073-9694
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10937-A-1032-2 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-200/3 FED SPEC 2ND MATERIAL RESPONSE OVERALL
•
HANDLE CLEARANCE: 1.219 INCHES NOMINAL IN
•
SURFACE TREATMENT: ANODIZE OVERALL
•
MATERIAL: ALUMINUM ALLOY 6061 OR ALUMINUM ALLOY 2024 OVERALL
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-200/3 FED SPEC 2ND MATERIAL RESPONSE OVERALL
OVERALL LENGTH4.280 INCHES NOMINAL IN
HANDLE CLEARANCE1.219 INCHES NOMINAL IN
SPECIAL FEATURESEACH HANDLE END HAS INTERNALLY THREADED HOLE 0.190-32 UNF-2B,0.50 INDEEP MIN. FOR MOUNTING PURPOSES
SURFACE TREATMENTANODIZE OVERALL
END ITEM IDENTIFICATIONEND ITEM ABF528 M56
MATERIALALUMINUM ALLOY 6061 OR ALUMINUM ALLOY 2024 OVERALL
SUBSTITUTES & CROSS-REFERENCES 2
A988-29Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
12283361Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 10937-A-1032-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10937-A-1032-2?
10937-A-1032-2 is a HANDLE,BOW.
What parts can replace 10937-A-1032-2?
There are 2 known substitutes for 10937-A-1032-2: A988-29, 12283361. Substitute compatibility should be verified for your specific system.
What is the NSN for 10937-A-1032-2?
10937-A-1032-2 is cataloged in the U.S. Government catalog under NSN 5340-01-073-9694. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10937-A-1032-2

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.