PartsTable
Technical Data Sheet
Download PDF

10936-4000A1032-2 — HANDLE,BOW

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

10936-4000A1032-2: HANDLE,BOW.

The HANDLE,BOW is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 6061 OVERALL, overall_length: 3.270 INCHES MINIMUM AND 3.290 INCHES MAXIMUM IN, handle_clearance: 1.340 INCHES MINIMUM AND 1.360 INCHES MAXIMUM IN, special_features: BLACK ANODIZE OVERALL OVAL CROSS SECTION SHAPE 0.625 IN. BY 0.280 IN.

IN, surface_treatment: ANODIZE OVERALL, nominal_thread_size: 0.190 INCHES IN. This part is cataloged in the U.S. Government catalog under NSN 5340-00-488-5074, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10936-4000A1032-2
NSN: 5340-00-488-5074
FSC: 5340 — Hardware, Commercial
CAGE: 1YGB8 — CAREY MANUFACTURING CO, INC DBA AMATOM ELECTRONIC HARDWARE DIV AMATOM ELECTRONIC HARDWARE (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 6061 OVERALL
overall_length3.270 INCHES MINIMUM AND 3.290 INCHES MAXIMUM IN
handle_clearance1.340 INCHES MINIMUM AND 1.360 INCHES MAXIMUM IN
special_featuresBLACK ANODIZE OVERALL OVAL CROSS SECTION SHAPE 0.625 IN. BY 0.280 IN. IN
surface_treatmentANODIZE OVERALL
nominal_thread_size0.190 INCHES IN
thread_series_designatorUNF
mounting_facility_quantity2
material_document_and_classificationQQ-A-225/8,T4 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationMIL-A-8625,TYPE 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
center_to_center_distance_between_mounting_facilities_parallel_to_length2.990 INCHES MINIMUM AND 3.010 INCHES MAXIMUM IN
NSN5340-00-488-5074
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10936-4000A1032-2 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING FACILITY QUANTITY: 2
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625,TYPE 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH: 2.990 INCHES MINIMUM AND 3.010 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-225/8,T4 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
NOMINAL THREAD SIZE: 0.190 INCHES IN
•
HANDLE CLEARANCE: 1.340 INCHES MINIMUM AND 1.360 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
MOUNTING FACILITY QUANTITY2
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625,TYPE 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH2.990 INCHES MINIMUM AND 3.010 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-225/8,T4 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
OVERALL LENGTH3.270 INCHES MINIMUM AND 3.290 INCHES MAXIMUM IN
NOMINAL THREAD SIZE0.190 INCHES IN
HANDLE CLEARANCE1.340 INCHES MINIMUM AND 1.360 INCHES MAXIMUM IN
SPECIAL FEATURESBLACK ANODIZE OVERALL OVAL CROSS SECTION SHAPE 0.625 IN. BY 0.280 IN. IN
SURFACE TREATMENTANODIZE OVERALL
MATERIALALUMINUM ALLOY 6061 OVERALL
SUBSTITUTES & CROSS-REFERENCES 2
C1033-1Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
ES4860-1Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 10936-4000A1032-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10936-4000A1032-2?
10936-4000A1032-2 is a HANDLE,BOW.
What parts can replace 10936-4000A1032-2?
There are 2 known substitutes for 10936-4000A1032-2: C1033-1, ES4860-1. Substitute compatibility should be verified for your specific system.
What is the NSN for 10936-4000A1032-2?
10936-4000A1032-2 is cataloged in the U.S. Government catalog under NSN 5340-00-488-5074. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10936-4000A1032-2

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.