PartsTable
Technical Data Sheet
Download PDF

10935397 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

10935397: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: PAPER AND RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OVERALL, hole_diameter: 0.280 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 2.000 INCHES NOMINAL IN, overall_length: 2.310 INCHES NOMINAL IN, aperture_diameter: 1.440 INCHES NOMINAL IN, outside_corner_radius: 0.250 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-586-6071, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10935397
NSN: 5330-00-586-6071
FSC: 5330 — Packing and Gasket Materials
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
materialPAPER AND RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OVERALL
hole_diameter0.280 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width2.000 INCHES NOMINAL IN
overall_length2.310 INCHES NOMINAL IN
aperture_diameter1.440 INCHES NOMINAL IN
outside_corner_radius0.250 INCHES NOMINAL IN
cross-sectional_thickness0.026 INCHES MINIMUM AND 0.036 INCHES MAXIMUM IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
material_document_and_classificationMIL-G-12803,NO. +3444-A MIL SPEC ALL MATERIAL RESPONSES OVERALL
outside_edge_to_bolt_hole_center_distance_along_length0.250 INCHES NOMINAL IN
center_to_center_distance_between_bolt_holes_along_width1.500 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
NSN5330-00-586-6071
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10935397 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.026 INCHES MINIMUM AND 0.036 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-12803,NO. +3444-A MIL SPEC ALL MATERIAL RESPONSES OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
APERTURE DIAMETER: 1.440 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH: 1.500 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH: 0.250 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.026 INCHES MINIMUM AND 0.036 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-12803,NO. +3444-A MIL SPEC ALL MATERIAL RESPONSES OVERALL
OVERALL LENGTH2.310 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OVERALL WIDTH2.000 INCHES NOMINAL IN
APERTURE DIAMETER1.440 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH1.500 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH0.250 INCHES NOMINAL IN
OUTSIDE CORNER RADIUS0.250 INCHES NOMINAL IN
MATERIALPAPER AND RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OVERALL
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES 1
5330005866071Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 10935397?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10935397?
10935397 is a GASKET.
What parts can replace 10935397?
There is 1 known substitute for 10935397: 5330005866071. Substitute compatibility should be verified for your specific system.
What is the NSN for 10935397?
10935397 is cataloged in the U.S. Government catalog under NSN 5330-00-586-6071. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10935397

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.