PartsTable
Technical Data Sheet
Download PDF

10933790 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

10933790: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.480 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN, material: STEEL BAND, overall_width: 2.000 INCHES NOMINAL IN, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 0.106 INCHES NOMINAL IN, loop_inside_diameter: 4.310 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-168-2455, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10933790
NSN: 5340-00-168-2455
FSC: 5340 — Hardware, Commercial
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
diameter0.480 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
materialSTEEL BAND
overall_width2.000 INCHES NOMINAL IN
tongue_hole_typeROUND, UNTHREADED
material_thickness0.106 INCHES NOMINAL IN
loop_inside_diameter4.310 INCHES NOMINAL IN
integral_nut_type_and_quantity1 PLAIN EQUAL LENGTH TONGUES
material_document_and_classificationQQ-S-698 FED SPEC SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end3.120 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole2.710 INCHES NOMINAL IN
NSN5340-00-168-2455
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10933790 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-698 FED SPEC SINGLE MATERIAL RESPONSE BAND
•
DIAMETER: 0.480 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.106 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 3.120 INCHES NOMINAL IN
•
INTEGRAL NUT TYPE AND QUANTITY: 1 PLAIN EQUAL LENGTH TONGUES
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 2.710 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-698 FED SPEC SINGLE MATERIAL RESPONSE BAND
DIAMETER0.480 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
OVERALL WIDTH2.000 INCHES NOMINAL IN
MATERIAL THICKNESS0.106 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END3.120 INCHES NOMINAL IN
INTEGRAL NUT TYPE AND QUANTITY1 PLAIN EQUAL LENGTH TONGUES
TONGUE HOLE TYPEROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE2.710 INCHES NOMINAL IN
MATERIALSTEEL BAND
LOOP INSIDE DIAMETER4.310 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
53401682455Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 10933790?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10933790?
10933790 is a CLAMP,LOOP.
What parts can replace 10933790?
There is 1 known substitute for 10933790: 53401682455. Substitute compatibility should be verified for your specific system.
What is the NSN for 10933790?
10933790 is cataloged in the U.S. Government catalog under NSN 5340-00-168-2455. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10933790

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.