10932707-22: HOSE ASSEMBLY,NONMETALLIC.
The HOSE ASSEMBLY,NONMETALLIC is a the manufacturer industrial component. Key specifications include temp_rating: 300.0 FAHRENHEIT SINGLE RESPONSE DEGF, connection_type: THREADED INTERNAL TUBE FIRST END, inside_diameter: 0.305 INCHES MINIMUM AND 0.336 INCHES MAXIMUM IN, connection_style: SWIVEL NUT WITH LOOSE OR INTEGRAL CLINCH SLEEVE FIRST END, outside_diameter: 0.547 INCHES MINIMUM AND 0.637 INCHES MAXIMUM IN, operating_pressure: 1000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS. This part is cataloged in the U.S.
Government catalog under NSN 4720-00-437-1111, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| temp_rating | 300.0 FAHRENHEIT SINGLE RESPONSE DEGF |
| connection_type | THREADED INTERNAL TUBE FIRST END |
| inside_diameter | 0.305 INCHES MINIMUM AND 0.336 INCHES MAXIMUM IN |
| connection_style | SWIVEL NUT WITH LOOSE OR INTEGRAL CLINCH SLEEVE FIRST END |
| outside_diameter | 0.547 INCHES MINIMUM AND 0.637 INCHES MAXIMUM IN |
| operating_pressure | 1000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS |
| burst_test_pressure | 4000.0 POUNDS PER SQUARE INCH LBS |
| end_connection_design | STRAIGHT FIRST END |
| inside_surface_condition | SMOOTH |
| media_for_which_designed | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| hydrostatic_test_pressure | 2000.0 POUNDS PER SQUARE INCH LBS |
| cross-sectional_shape_style | ROUND |
| NSN | 4720-00-437-1111 |
| MEASURING METHOD AND LENGTH | 19.750 INCHES NOMINAL OVERALL IN |
| TEMP RATING | 300.0 FAHRENHEIT SINGLE RESPONSE DEGF |
| MINIMUM INSIDE BENDING RADIUS | 2.750 INCHES IN |
| CONNECTION STYLE | SWIVEL NUT WITH LOOSE OR INTEGRAL CLINCH SLEEVE FIRST END |
| SPECIAL TEST FEATURES | HOT OIL CIRCULATION TEST W/MIL-L-21260 GRADE 2 OIL AT 300 DEG F CIRCULATED THRU HOSE ASSY FOR 240 HR AT AN INTERNAL PRESSURE OF 175 PSI AND AN EXTERNAL AMBIENT AIR TEMP OF 75 DEG F THEN BEND EMPTY HOSE ASSY 180 DEG AROUND 2.75 IN. MANDREL W/HOSE AT 75 DEG F THEN PROOF TEST IN |
| END CONNECTION DESIGN | STRAIGHT FIRST END |
| LAYER COMPOSITION AND LOCATION | 2ND LAYER BRAIDED STEEL WIRE AND 1ST LAYER BRAIDED FABRIC AND OUTER LAYER RUBBER IMPREGNATED BRAIDED FABRIC |
| CONNECTION TYPE | THREADED INTERNAL TUBE FIRST END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| OUTSIDE DIAMETER | 0.547 INCHES MINIMUM AND 0.637 INCHES MAXIMUM IN |
No substitute or cross-reference records for this part.