PartsTable
Technical Data Sheet
Download PDF

10930543 — ROD,STRAIGHT,HEADLESS

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

10930543: ROD,STRAIGHT,HEADLESS.

The ROD,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL COMP 4140 OR STEEL COMP 8640 OVERALL, chamfer_angle: 45.0 DEGREES NOMINAL LOCATION NOT OTHERWISE SPECIFIED, hole_diameter: 0.1870 INCHES LOCATION NOT OTHERWISE SPECIFIED IN, chamfer_length: 0.0625 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_length: 12.7500 INCHES NOMINAL IN, overall_diameter: 0.9950 INCHES MINIMUM AND 0.9970 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-299-1595, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10930543
NSN: 5340-01-299-1595
FSC: 5340 — Hardware, Commercial
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
materialSTEEL COMP 4140 OR STEEL COMP 8640 OVERALL
chamfer_angle45.0 DEGREES NOMINAL LOCATION NOT OTHERWISE SPECIFIED
hole_diameter0.1870 INCHES LOCATION NOT OTHERWISE SPECIFIED IN
chamfer_length0.0625 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_length12.7500 INCHES NOMINAL IN
overall_diameter0.9950 INCHES MINIMUM AND 0.9970 INCHES MAXIMUM IN
surface_treatmentPHOSPHATE MANGANESE OVERALL
drilled_hole_locationONE END
distance_from_end_to_hole_center0.4375 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
material_document_and_classificationQQ-S-624 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationMIL-P-16232 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5340-01-299-1595
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10930543 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CHAMFER LENGTH: 0.0625 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-P-16232 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
OVERALL DIAMETER: 0.9950 INCHES MINIMUM AND 0.9970 INCHES MAXIMUM IN
•
DRILLED HOLE LOCATION: ONE END
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-624 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
SURFACE TREATMENT: PHOSPHATE MANGANESE OVERALL
•
HOLE DIAMETER: 0.1870 INCHES LOCATION NOT OTHERWISE SPECIFIED IN
TECHNICAL CHARACTERISTICS
CHAMFER LENGTH0.0625 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-P-16232 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
OVERALL DIAMETER0.9950 INCHES MINIMUM AND 0.9970 INCHES MAXIMUM IN
DRILLED HOLE LOCATIONONE END
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-624 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
OVERALL LENGTH12.7500 INCHES NOMINAL IN
SURFACE TREATMENTPHOSPHATE MANGANESE OVERALL
HOLE DIAMETER0.1870 INCHES LOCATION NOT OTHERWISE SPECIFIED IN
CHAMFER ANGLE45.0 DEGREES NOMINAL LOCATION NOT OTHERWISE SPECIFIED
DISTANCE FROM END TO HOLE CENTER0.4375 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 10930543?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10930543?
10930543 is a ROD,STRAIGHT,HEADLESS.
What is the NSN for 10930543?
10930543 is cataloged in the U.S. Government catalog under NSN 5340-01-299-1595. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10930543

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.