PartsTable
Technical Data Sheet
PartsTable / MRO / 109298
109298 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

MOLD,POTTING,ELECTRICAL CONNECTO. Key specifications include material: STEEL OVERALL, hole_type: DRILLED, head_style: FILLISTER, head_height: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN, thread_class: 3A A, head_diameter: 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-0338, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 109298
NSN: 3110-00-100-0338
FSC: 3110
CAGE: 29510 — KOMATSU AMERICAN INTL CO (USA)
SPECIFICATIONS
materialSTEEL OVERALL
hole_typeDRILLED
head_styleFILLISTER
head_height0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
thread_class3A A
head_diameter0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
hole_diameter0.062 INCHES NOMINAL IN
hole_quantity1
overall_width0.25 INCHES NOMINAL IN
thread_length0.719 INCHES MINIMUM IN
overall_length1.25 INCHES NOMINAL IN
fastener_length2.490 INCHES MINIMUM AND 2.510 INCHES MAXIMUM IN
NSN3110-00-100-0338
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 109298 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
BACKFACE CORNER RADIUS: 0.1250 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
OUTSIDE DIAMETER: 6.3750 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NORMAL ANGLE
TECHNICAL CHARACTERISTICS (FLIS)
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
BACKFACE CORNER RADIUS0.1250 INCHES NOMINAL IN
OVERALL WIDTH1.5000 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
OUTSIDE DIAMETER6.3750 INCHES NOMINAL IN
STYLE DESIGNATORNORMAL ANGLE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 26
752DELUXEInterchangeable
interchangeable cross-reference
interchangeable
752Interchangeable
interchangeable cross-reference
interchangeable
7748694Interchangeable
interchangeable cross-reference
interchangeable
109298Interchangeable
interchangeable cross-reference
interchangeable
SRS109298Interchangeable
interchangeable cross-reference
interchangeable
149044Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 109298?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 109298?
109298 is a MOLD,POTTING,ELECTRICAL CONNECTO. It is classified as a MRO (MRO_GENERAL).
What parts can replace 109298?
There are 26 known substitutes for 109298: 752DELUXE, 752, 7748694 and 23 more. Substitute compatibility should be verified for your specific system.
Is 109298 still available?
109298 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 109298

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026