PartsTable
Technical Data Sheet
Download PDF

10915991 — BRACKET,ANGLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

10915991: BRACKET,ANGLE.

The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include first_leg_style: SQUARE, first_leg_width: 1.500 INCHES NOMINAL IN, first_leg_hole_diameter: 0.410 INCHES NOMINAL IN, first_leg_hole_arrangement_style: TWO HOLES, first_leg_distance_between_hole_centers_along_length: 1.490 INCHES MINIMUM AND 1.510 INCHES MAXIMUM IN, first_leg_distance_from_edge_to_hole_center_along_width: 0.750 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-134-7794, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10915991
NSN: 5340-00-134-7794
FSC: 5340 — Hardware, Commercial
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
first_leg_styleSQUARE
first_leg_width1.500 INCHES NOMINAL IN
first_leg_hole_diameter0.410 INCHES NOMINAL IN
first_leg_hole_arrangement_styleTWO HOLES
first_leg_distance_between_hole_centers_along_length1.490 INCHES MINIMUM AND 1.510 INCHES MAXIMUM IN
first_leg_distance_from_edge_to_hole_center_along_width0.750 INCHES NOMINAL IN
first_leg_distance_from_edge_to_hole_center_along_length0.500 INCHES NOMINAL IN
NSN5340-00-134-7794
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10915991 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.500 INCHES NOMINAL IN
•
FIRST LEG HOLE DIAMETER: 0.410 INCHES NOMINAL IN
•
FIRST LEG HOLE ARRANGEMENT STYLE: TWO HOLES
•
FIRST LEG STYLE: SQUARE
•
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH: 0.750 INCHES NOMINAL IN
•
FIRST LEG WIDTH: 1.500 INCHES NOMINAL IN
•
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH: 1.490 INCHES MINIMUM AND 1.510 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.500 INCHES NOMINAL IN
FIRST LEG HOLE DIAMETER0.410 INCHES NOMINAL IN
FIRST LEG HOLE ARRANGEMENT STYLETWO HOLES
FIRST LEG STYLESQUARE
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH0.750 INCHES NOMINAL IN
FIRST LEG WIDTH1.500 INCHES NOMINAL IN
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH1.490 INCHES MINIMUM AND 1.510 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
5340001347794Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 10915991?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10915991?
10915991 is a BRACKET,ANGLE.
What parts can replace 10915991?
There is 1 known substitute for 10915991: 5340001347794. Substitute compatibility should be verified for your specific system.
What is the NSN for 10915991?
10915991 is cataloged in the U.S. Government catalog under NSN 5340-00-134-7794. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10915991