PartsTable
Technical Data Sheet
Download PDF

10912456 — BRUSH,ELECTRICAL CONTACT

✓ Government record, cited
— · COMPONENT
PRODUCT OVERVIEW

10912456: BRUSH,ELECTRICAL CONTACT.

The BRUSH,ELECTRICAL CONTACT is a the manufacturer industrial component. Key specifications include angle: 30.0 DEGREES NOMINAL, width: 1.057 INCHES MINIMUM AND 1.062 INCHES MAXIMUM IN, length: 1.312 INCHES NOMINAL IN, radius: 1.440 INCHES NOMINAL IN, material: CARBON, clip_type: NEMA HAMMER TYPE CHANNEL A. This part is cataloged in the U.S.

Government catalog under NSN 5977-00-179-4895, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10912456
NSN: 5977-00-179-4895
NIINs: 001794895, 005741046
FSC: 5977 — Electrical Contact Brushes and Electrodes
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
angle30.0 DEGREES NOMINAL
width1.057 INCHES MINIMUM AND 1.062 INCHES MAXIMUM IN
length1.312 INCHES NOMINAL IN
radius1.440 INCHES NOMINAL IN
materialCARBON
clip_typeNEMA HAMMER TYPE CHANNEL A
thickness0.395 INCHES MINIMUM AND 0.400 INCHES MAXIMUM IN
top_styleBEVELED FRONT
body_styleRECTANGULAR COMMUTATOR
bevel_angle8.0 DEGREES NOMINAL
hole_diameter0.031 INCHES NOMINAL IN
special_featuresFRONT EDGE OF CLIP TURNED UP 0.250 IN IN
NSN5977-00-179-4895
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available BRUSH,ELECTRICAL CONTACT TITLE COMPONENT PN 10912456 MFR BRUSH,ELECTRICAL CONTA
KEY FEATURES
•
LENGTH: 1.312 INCHES NOMINAL IN
•
BODY STYLE: RECTANGULAR COMMUTATOR
•
RADIUS: 1.440 INCHES NOMINAL IN
•
DISTANCE FROM CENTER OF HOLE TO OUTSIDE EDGE: 0.199 INCHES NOMINAL IN
•
TERMINAL HOLE DIAMETER: 0.203 INCHES NOMINAL IN
•
DISTANCE FROM BRUSH TOP TO HOLE CENTERLINE: 0.437 INCHES NOMINAL IN
•
TOP STYLE: BEVELED FRONT
•
SHUNT POSITION DESIGNATOR: 3 AND 9
TECHNICAL CHARACTERISTICS
LENGTH1.312 INCHES NOMINAL IN
BODY STYLERECTANGULAR COMMUTATOR
RADIUS1.440 INCHES NOMINAL IN
DISTANCE FROM CENTER OF HOLE TO OUTSIDE EDGE0.199 INCHES NOMINAL IN
TERMINAL HOLE DIAMETER0.203 INCHES NOMINAL IN
DISTANCE FROM BRUSH TOP TO HOLE CENTERLINE0.437 INCHES NOMINAL IN
TOP STYLEBEVELED FRONT
SHUNT POSITION DESIGNATOR3 AND 9
CLIP TYPENEMA HAMMER TYPE OFFSET A
STYLE DESIGNATORONE PIECE
SUBSTITUTES & CROSS-REFERENCES 2
26C212P02Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
5977001794895Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 10912456?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10912456?
10912456 is a BRUSH,ELECTRICAL CONTACT.
What parts can replace 10912456?
There are 2 known substitutes for 10912456: 26C212P02, 5977001794895. Substitute compatibility should be verified for your specific system.
What is the NSN for 10912456?
10912456 is cataloged in the U.S. Government catalog under NSN 5977-00-179-4895. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10912456

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.