PartsTable
Technical Data Sheet
Download PDF

10912391 — BRACKET,ANGLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

10912391: BRACKET,ANGLE.

The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include first_leg_angle: 90.0 DEGREES NOMINAL, first_leg_width: 1.530 INCHES NOMINAL IN, first_leg_length: 1.460 INCHES NOMINAL IN, style_designator: ANGLE, second_leg_length: 7.000 INCHES NOMINAL IN, first_leg_thickness: 0.190 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-402-4424, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10912391
NSN: 5340-00-402-4424
FSC: 5340 — Hardware, Commercial
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
first_leg_angle90.0 DEGREES NOMINAL
first_leg_width1.530 INCHES NOMINAL IN
first_leg_length1.460 INCHES NOMINAL IN
style_designatorANGLE
second_leg_length7.000 INCHES NOMINAL IN
first_leg_thickness0.190 INCHES NOMINAL IN
second_leg_thickness0.190 INCHES NOMINAL IN
first_leg_hole_diameter0.810 INCHES NOMINAL IN
first_leg_hole_arrangement_styleONE HOLE
first_leg_distance_from_edge_to_hole_center_along_width0.440 INCHES NOMINAL IN
NSN5340-00-402-4424
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10912391 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST LEG HOLE DIAMETER: 0.810 INCHES NOMINAL IN
•
FIRST LEG ANGLE: 90.0 DEGREES NOMINAL
•
SECOND LEG LENGTH: 7.000 INCHES NOMINAL IN
•
FIRST LEG HOLE ARRANGEMENT STYLE: ONE HOLE
•
STYLE DESIGNATOR: ANGLE
•
SECOND LEG THICKNESS: 0.190 INCHES NOMINAL IN
•
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH: 0.440 INCHES NOMINAL IN
•
FIRST LEG THICKNESS: 0.190 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
FIRST LEG HOLE DIAMETER0.810 INCHES NOMINAL IN
FIRST LEG ANGLE90.0 DEGREES NOMINAL
SECOND LEG LENGTH7.000 INCHES NOMINAL IN
FIRST LEG HOLE ARRANGEMENT STYLEONE HOLE
STYLE DESIGNATORANGLE
SECOND LEG THICKNESS0.190 INCHES NOMINAL IN
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH0.440 INCHES NOMINAL IN
FIRST LEG THICKNESS0.190 INCHES NOMINAL IN
FIRST LEG LENGTH1.460 INCHES NOMINAL IN
FIRST LEG WIDTH1.530 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
5340004024424Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 10912391?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10912391?
10912391 is a BRACKET,ANGLE.
What parts can replace 10912391?
There is 1 known substitute for 10912391: 5340004024424. Substitute compatibility should be verified for your specific system.
What is the NSN for 10912391?
10912391 is cataloged in the U.S. Government catalog under NSN 5340-00-402-4424. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10912391