PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 1091088
1091088 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PACKING WITH RETAINER is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC PACKING, construction: ONE-PIECE, outside_diameter: 0.672 INCHES NOMINAL IN, surface_treatment: PASSIVATE RETAINER, retainer_thickness: 0.031 INCHES NOMINAL IN, packing_inside_diameter: 0.466 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-849-1875, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1091088
NSN: 5330-00-849-1875
FSC: 5330
CAGE: 10001 — NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC PACKING
constructionONE-PIECE
outside_diameter0.672 INCHES NOMINAL IN
surface_treatmentPASSIVATE RETAINER
retainer_thickness0.031 INCHES NOMINAL IN
packing_inside_diameter0.466 INCHES NOMINAL IN
packing_ring_cross-sectional_diameter0.164 INCHES NOMINAL IN
NSN5330-00-849-1875
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1091088 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER THICKNESS: 0.031 INCHES NOMINAL IN
•
SURFACE TREATMENT: PASSIVATE RETAINER
•
PACKING INSIDE DIAMETER: 0.466 INCHES NOMINAL IN
•
PACKING RING CROSS-SECTIONAL DIAMETER: 0.164 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 0.672 INCHES NOMINAL IN
•
CONSTRUCTION: ONE-PIECE
•
MATERIAL: RUBBER SYNTHETIC PACKING
TECHNICAL CHARACTERISTICS (FLIS)
RETAINER THICKNESS0.031 INCHES NOMINAL IN
SURFACE TREATMENTPASSIVATE RETAINER
PACKING INSIDE DIAMETER0.466 INCHES NOMINAL IN
PACKING RING CROSS-SECTIONAL DIAMETER0.164 INCHES NOMINAL IN
OUTSIDE DIAMETER0.672 INCHES NOMINAL IN
CONSTRUCTIONONE-PIECE
MATERIALRUBBER SYNTHETIC PACKING
MATERIALSTEEL CORROSION RESISTING RETAINER
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
M5423/16-01Interchangeable
interchangeable cross-reference
interchangeable
437-6726903-7Interchangeable
interchangeable cross-reference
interchangeable
M5423/16-1Interchangeable
interchangeable cross-reference
interchangeable
TS10368Interchangeable
Same NIIN cross-reference
interchangeable
15P487Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1091088?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1091088?
1091088 is a PACKING WITH RETAINER.
What parts can replace 1091088?
There are 5 known substitutes for 1091088: M5423/16-01, 437-6726903-7, M5423/16-1 and 2 more. Substitute compatibility should be verified for your specific system.
Is 1091088 still available?
1091088 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1091088

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026