PartsTable
Technical Data Sheet
Download PDF

10910268 — SEAL,NONMETALLIC CHANNEL

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

10910268: SEAL,NONMETALLIC CHANNEL.

The SEAL,NONMETALLIC CHANNEL is a the manufacturer industrial component. Key specifications include material: RUBBER CHLOROPRENE CLASS CR OVERALL, web_width: 0.500 INCHES NOMINAL IN, construction: SOLID, end_cut_angle: 65.0 DEGREES, web_thickness: 0.125 INCHES NOMINAL IN, left_tip_style: LEFT W/ OUTSIDE RADIUS. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-191-1161, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10910268
NSN: 5330-00-191-1161
FSC: 5330 — Packing and Gasket Materials
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
materialRUBBER CHLOROPRENE CLASS CR OVERALL
web_width0.500 INCHES NOMINAL IN
constructionSOLID
end_cut_angle65.0 DEGREES
web_thickness0.125 INCHES NOMINAL IN
left_tip_styleLEFT W/ OUTSIDE RADIUS
overall_length10.091 INCHES NOMINAL IN
left_tip_radius0.500 INCHES NOMINAL IN
right_tip_radius0.500 INCHES NOMINAL IN
style_designatorSTRIP
left_inside_angle90.0 DEGREES NOMINAL
left_outside_angle90.0 DEGREES NOMINAL
NSN5330-00-191-1161
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10910268 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RIGHT OUTSIDE ANGLE: 90.0 DEGREES NOMINAL
•
LEFT TIP STYLE: LEFT W/ OUTSIDE RADIUS
•
LEFT SIDE FLANGE THICKNESS AT WEB: 0.125 INCHES NOMINAL IN
•
LEFT TIP RADIUS: 0.500 INCHES NOMINAL IN
•
LEFT SIDE FLANGE HEIGHT: 0.500 INCHES NOMINAL IN
•
RIGHT SIDE FLANGE THICKNESS AT WEB: 0.125 INCHES NOMINAL IN
•
STYLE DESIGNATOR: STRIP
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM D2000,2BC515B1E3F1 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS
RIGHT OUTSIDE ANGLE90.0 DEGREES NOMINAL
LEFT TIP STYLELEFT W/ OUTSIDE RADIUS
LEFT SIDE FLANGE THICKNESS AT WEB0.125 INCHES NOMINAL IN
LEFT TIP RADIUS0.500 INCHES NOMINAL IN
LEFT SIDE FLANGE HEIGHT0.500 INCHES NOMINAL IN
RIGHT SIDE FLANGE THICKNESS AT WEB0.125 INCHES NOMINAL IN
STYLE DESIGNATORSTRIP
MATERIAL DOCUMENT AND CLASSIFICATIONASTM D2000,2BC515B1E3F1 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
OVERALL LENGTH10.091 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLEOPEN CHANNEL
SUBSTITUTES & CROSS-REFERENCES 1
3006047Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 10910268?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10910268?
10910268 is a SEAL,NONMETALLIC CHANNEL.
What parts can replace 10910268?
There is 1 known substitute for 10910268: 3006047. Substitute compatibility should be verified for your specific system.
What is the NSN for 10910268?
10910268 is cataloged in the U.S. Government catalog under NSN 5330-00-191-1161. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10910268