PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 10906242
10906242 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: STEEL AND ASBESTOS OVERALL, hole_diameter: 0.438 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 5.125 INCHES NOMINAL IN, aperture_width: 2.375 INCHES NOMINAL IN, overall_length: 12.438 INCHES NOMINAL IN, aperture_length: 10.000 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-736-0226, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10906242
NSN: 5330-00-736-0226
FSC: 5330
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
materialSTEEL AND ASBESTOS OVERALL
hole_diameter0.438 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width5.125 INCHES NOMINAL IN
aperture_width2.375 INCHES NOMINAL IN
overall_length12.438 INCHES NOMINAL IN
aperture_length10.000 INCHES NOMINAL IN
inside_corner_radius0.500 INCHES NOMINAL IN
outside_corner_radius0.250 INCHES NOMINAL IN
cross-sectional_thickness0.130 INCHES NOMINAL IN
cross-sectional_shape_styleMETAL AND METALLIC MATERIALS
outside_edge_to_bolt_hole_center_distance_along_width0.625 INCHES NOMINAL IN
outside_edge_to_bolt_hole_center_distance_along_length0.500 INCHES NOMINAL IN
NSN5330-00-736-0226
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10906242 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.130 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: METAL AND METALLIC MATERIALS
•
HOLE DIAMETER: 0.438 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH: 0.625 INCHES NOMINAL IN
•
OUTSIDE CORNER RADIUS: 0.250 INCHES NOMINAL IN
•
APERTURE WIDTH: 2.375 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL THICKNESS0.130 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLEMETAL AND METALLIC MATERIALS
HOLE DIAMETER0.438 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
OVERALL WIDTH5.125 INCHES NOMINAL IN
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH0.625 INCHES NOMINAL IN
OUTSIDE CORNER RADIUS0.250 INCHES NOMINAL IN
APERTURE WIDTH2.375 INCHES NOMINAL IN
OVERALL LENGTH12.438 INCHES NOMINAL IN
INSIDE CORNER RADIUS0.500 INCHES NOMINAL IN
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH0.500 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
016261Interchangeable
interchangeable cross-reference
interchangeable
13227E6777-44Interchangeable
interchangeable cross-reference
interchangeable
016-269-00Interchangeable
interchangeable cross-reference
interchangeable
016-268-00Interchangeable
interchangeable cross-reference
interchangeable
5330007360226Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 10906242?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10906242?
10906242 is a GASKET.
What parts can replace 10906242?
There are 5 known substitutes for 10906242: 016261, 13227E6777-44, 016-269-00 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 10906242?
10906242 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-736-0226. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10906242

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026