PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 109054-337
109054-337 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,SYNCHRO is a the manufacturer industrial component. Key specifications include width: 0.390 INCHES NOMINAL IN, height: 0.133 INCHES NOMINAL IN, length: 0.320 INCHES NOMINAL IN, hole_diameter: 0.112 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-652-3387, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
109054-337
NSN: 5340-00-652-3387
FSC: 5340
CAGE: 06773 — TIMBER TOP INC (USA)
SPECIFICATIONS
width0.390 INCHES NOMINAL IN
height0.133 INCHES NOMINAL IN
length0.320 INCHES NOMINAL IN
hole_diameter0.112 INCHES NOMINAL IN
NSN5340-00-652-3387
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 109054-337 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HOLE DIAMETER: 0.112 INCHES NOMINAL IN
•
LENGTH: 0.320 INCHES NOMINAL IN
•
HEIGHT: 0.133 INCHES NOMINAL IN
•
WIDTH: 0.390 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
HOLE DIAMETER0.112 INCHES NOMINAL IN
LENGTH0.320 INCHES NOMINAL IN
HEIGHT0.133 INCHES NOMINAL IN
WIDTH0.390 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
A20865Interchangeable
interchangeable cross-reference
interchangeable
A21653Interchangeable
interchangeable cross-reference
interchangeable
C11-206Interchangeable
interchangeable cross-reference
interchangeable
1047241-7Interchangeable
Same NIIN cross-reference
interchangeable
993905-02Interchangeable
Same NIIN cross-reference
interchangeable
918337-5Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 109054-337?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 109054-337?
109054-337 is a CLAMP,SYNCHRO.
What parts can replace 109054-337?
There are 11 known substitutes for 109054-337: A20865, A21653, C11-206 and 8 more. Substitute compatibility should be verified for your specific system.
Is 109054-337 still available?
109054-337 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 109054-337

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026