PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 10905014
10905014 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

CAP,PROTECTIVE,DUST AND MOISTURE. Key specifications include material: STEEL, design_type: FRICTION, special_features: FIRST HOLE 0.5000-20 UNJF-3B; FOUR HOLES 0.104 IN DIA. IN, end_item_identification: USED ON M60 TANK.

This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-110-9786, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10905014
NSN: 5340-00-110-9786
FSC: 5340
CAGE: C3846 — OPTRONIC UND NACHRICHTENTECHNIK ON SPECTRAL GMBH (DEU)
SPECIFICATIONS
materialSTEEL
design_typeFRICTION
special_featuresFIRST HOLE 0.5000-20 UNJF-3B; FOUR HOLES 0.104 IN DIA. IN
end_item_identificationUSED ON M60 TANK
NSN5340-00-110-9786
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10905014 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL
•
DESIGN TYPE: FRICTION
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL
SPECIAL FEATURESFIRST HOLE 0.5000-20 UNJF-3B; FOUR HOLES 0.104 IN DIA. IN
END ITEM IDENTIFICATIONUSED ON M60 TANK
DESIGN TYPEFRICTION
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
DS-920870Interchangeable
interchangeable cross-reference
interchangeable
MS21318-7Interchangeable
interchangeable cross-reference
interchangeable
14071Interchangeable
interchangeable cross-reference
interchangeable
10375679Interchangeable
Same NIIN cross-reference
interchangeable
1025001109786Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 10905014?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10905014?
10905014 is a CAP,PROTECTIVE,DUST AND MOISTURE.
What parts can replace 10905014?
There are 5 known substitutes for 10905014: DS-920870, MS21318-7, 14071 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 10905014?
10905014 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-110-9786. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10905014

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026