PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 10904B1032-4
10904B1032-4 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The HANDLE,BOW is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY 360 OVERALL, overall_length: 4.843 INCHES NOMINAL IN, handle_clearance: 1.219 INCHES NOMINAL IN, surface_treatment: NICKEL OVERALL, nominal_thread_size: 0.190 INCHES IN, thread_series_designator: UNF. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-060-3414, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10904B1032-4
NSN: 5340-00-060-3414
FSC: 5340
CAGE: 06540 — NEW HAVEN MFG CORP AMATOM ELECTRONIC HARDWARE DIV (USA)
SPECIFICATIONS
materialCOPPER ALLOY 360 OVERALL
overall_length4.843 INCHES NOMINAL IN
handle_clearance1.219 INCHES NOMINAL IN
surface_treatmentNICKEL OVERALL
nominal_thread_size0.190 INCHES IN
thread_series_designatorUNF
mounting_facility_quantity2
material_document_and_classificationQQ-B-626,1/2H FED SPEC SINGLE MATERIAL RESPONSE OVERALL
center_to_center_distance_between_mounting_facilities_parallel_to_length4.562 INCHES NOMINAL IN
NSN5340-00-060-3414
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10904B1032-4 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH: 4.562 INCHES NOMINAL IN
•
HANDLE CLEARANCE: 1.219 INCHES NOMINAL IN
•
MOUNTING FACILITY QUANTITY: 2
•
SURFACE TREATMENT: NICKEL OVERALL
•
MATERIAL: COPPER ALLOY 360 OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-B-626,1/2H FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
NOMINAL THREAD SIZE: 0.190 INCHES IN
TECHNICAL CHARACTERISTICS (FLIS)
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH4.562 INCHES NOMINAL IN
HANDLE CLEARANCE1.219 INCHES NOMINAL IN
MOUNTING FACILITY QUANTITY2
SURFACE TREATMENTNICKEL OVERALL
MATERIALCOPPER ALLOY 360 OVERALL
OVERALL LENGTH4.843 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-B-626,1/2H FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD SIZE0.190 INCHES IN
THREAD SERIES DESIGNATORUNF
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
103412Interchangeable
interchangeable cross-reference
interchangeable
T1090Interchangeable
interchangeable cross-reference
interchangeable
5184Interchangeable
interchangeable cross-reference
interchangeable
2111AInterchangeable
interchangeable cross-reference
interchangeable
4028-0001Interchangeable
interchangeable cross-reference
interchangeable
2111BInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 10904B1032-4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10904B1032-4?
10904B1032-4 is a HANDLE,BOW.
What parts can replace 10904B1032-4?
There are 11 known substitutes for 10904B1032-4: 103412, T1090, 5184 and 8 more. Substitute compatibility should be verified for your specific system.
Is 10904B1032-4 still available?
10904B1032-4 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10904B1032-4

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026