PartsTable
Technical Data Sheet
Download PDF

10904184 — BRACKET,ANGLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

10904184: BRACKET,ANGLE.

The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include first_leg_angle: 90.0 DEGREES NOMINAL, first_leg_style: END RADIUS, first_leg_width: 0.750 INCHES NOMINAL IN, first_leg_length: 1.875 INCHES NOMINAL IN, second_leg_style: CORNER RADIUS, second_leg_width: 0.750 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-800-6227, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10904184
NSN: 5340-00-800-6227
FSC: 5340 — Hardware, Commercial
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
first_leg_angle90.0 DEGREES NOMINAL
first_leg_styleEND RADIUS
first_leg_width0.750 INCHES NOMINAL IN
first_leg_length1.875 INCHES NOMINAL IN
second_leg_styleCORNER RADIUS
second_leg_width0.750 INCHES NOMINAL IN
special_features1 ADDL HOLE 1ST LEG,0.406 IN. DIA,0.750 IN. C TO C; FURNISHED W/ONE MS21318-27 SCREW,DRIVE IN
style_designatorANGLE
second_leg_length2.000 INCHES NOMINAL IN
first_leg_thickness0.250 INCHES NOMINAL IN
first_leg_end_radius0.375 INCHES NOMINAL IN
second_leg_thickness0.250 INCHES NOMINAL IN
NSN5340-00-800-6227
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10904184 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.250 INCHES NOMINAL IN
•
FIRST LEG HOLE DIAMETER: 0.120 INCHES NOMINAL IN
•
FIRST LEG ANGLE: 90.0 DEGREES NOMINAL
•
SECOND LEG WIDTH: 0.750 INCHES NOMINAL IN
•
SECOND LEG LENGTH: 2.000 INCHES NOMINAL IN
•
STYLE DESIGNATOR: ANGLE
•
FIRST LEG STYLE: END RADIUS
•
SECOND LEG THICKNESS: 0.250 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.250 INCHES NOMINAL IN
FIRST LEG HOLE DIAMETER0.120 INCHES NOMINAL IN
FIRST LEG ANGLE90.0 DEGREES NOMINAL
SECOND LEG WIDTH0.750 INCHES NOMINAL IN
SECOND LEG LENGTH2.000 INCHES NOMINAL IN
STYLE DESIGNATORANGLE
FIRST LEG STYLEEND RADIUS
SECOND LEG THICKNESS0.250 INCHES NOMINAL IN
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH0.375 INCHES NOMINAL IN
FIRST LEG THICKNESS0.250 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
5340008006227Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 10904184?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10904184?
10904184 is a BRACKET,ANGLE.
What parts can replace 10904184?
There is 1 known substitute for 10904184: 5340008006227. Substitute compatibility should be verified for your specific system.
What is the NSN for 10904184?
10904184 is cataloged in the U.S. Government catalog under NSN 5340-00-800-6227. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10904184