PartsTable
Technical Data Sheet
PartsTable / MRO / 10900-6
10900-6 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

FILTER,RADIO FREQUENCY INTERFERE. Key specifications include material: STEEL OVERALL, end_style: SPRING END,SQUARED AND GROUND BOTH ENDS, body_width: 1.438 INCHES MINIMUM AND 1.562 INCHES MAXIMUM IN, body_height: 3.063 INCHES MINIMUM AND 3.187 INCHES MAXIMUM IN, body_length: 3.063 INCHES MINIMUM AND 3.187 INCHES MAXIMUM IN, temp_rating: -175.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-395-1652, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 10900-6
NSN: 5331-00-395-1652
FSC: 5331 — O-RING
CAGE: 95272 — STILLMAN SEAL CORPORATION DIV STILLMAN SEAL CORPERATION (USA)
SPECIFICATIONS
materialSTEEL OVERALL
end_styleSPRING END,SQUARED AND GROUND BOTH ENDS
body_width1.438 INCHES MINIMUM AND 1.562 INCHES MAXIMUM IN
body_height3.063 INCHES MINIMUM AND 3.187 INCHES MAXIMUM IN
body_length3.063 INCHES MINIMUM AND 3.187 INCHES MAXIMUM IN
temp_rating-175.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
coil_quantity6-1/2
inclosure_typeENCASED
overall_length4.328 INCHES MINIMUM AND 4.360 INCHES MAXIMUM IN
hardness_rating70.0 SHORE DUROMETER A NOMINAL
inside_diameter0.781 INCHES NOMINAL IN
outside_diameter0.613 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN
NSN5331-00-395-1652
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10900-6 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 0.613 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN
•
MATERIAL: RUBBER SILICONE CLASS Q
•
TEMP RATING: -175.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
•
CENTER HOLE DIAMETER: 0.468 INCHES NOMINAL IN
•
CROSS-SECTIONAL HEIGHT: 0.078 INCHES NOMINAL IN
•
HARDNESS RATING: 70.0 SHORE DUROMETER A NOMINAL
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER0.613 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN
MATERIALRUBBER SILICONE CLASS Q
TEMP RATING-175.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
CENTER HOLE DIAMETER0.468 INCHES NOMINAL IN
CROSS-SECTIONAL HEIGHT0.078 INCHES NOMINAL IN
HARDNESS RATING70.0 SHORE DUROMETER A NOMINAL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 19
R12066Interchangeable
interchangeable cross-reference
interchangeable
12-066Interchangeable
interchangeable cross-reference
interchangeable
PG31Interchangeable
interchangeable cross-reference
interchangeable
12361169Interchangeable
interchangeable cross-reference
interchangeable
1506630Interchangeable
interchangeable cross-reference
interchangeable
913007-001Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 10900-6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10900-6?
10900-6 is a FILTER,RADIO FREQUENCY INTERFERE. It is classified as a MRO (MRO_GENERAL).
What parts can replace 10900-6?
There are 19 known substitutes for 10900-6: R12066, 12-066, PG31 and 16 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 10900-6?
10900-6 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-395-1652. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10900-6

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026