PartsTable
Technical Data Sheet
PartsTable / O-RING / 1090-41565 ITEM 15

1090-41565 ITEM 15 — Technical Data Sheet

✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROCARBON CLASS FPM, temp_rating: -15.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF, hardness_rating: 75.0 SHORE DUROMETER A NOMINAL, outside_diameter: 1.302 INCHES MINIMUM AND 1.334 INCHES MAXIMUM IN, center_hole_diameter: 1.102 INCHES MINIMUM AND 1.122 INCHES MAXIMUM IN, elongation_percentage: 125 MAXIMUM. This part is cataloged in the Federal Logistics Information System under NSN 5331-00-167-5111, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1090-41565 ITEM 15
NSN: 5331-00-167-5111
FSC: 5331 — O-RING
CAGE: 07270 — MOOG INC. DBA AMPAC-ISP CORP (USA)
SPECIFICATIONS
materialRUBBER FLUOROCARBON CLASS FPM
temp_rating-15.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
hardness_rating75.0 SHORE DUROMETER A NOMINAL
outside_diameter1.302 INCHES MINIMUM AND 1.334 INCHES MAXIMUM IN
center_hole_diameter1.102 INCHES MINIMUM AND 1.122 INCHES MAXIMUM IN
elongation_percentage125 MAXIMUM
cross-sectional_height0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
material_document_and_classificationAMS7276 ASSN STD SINGLE MATERIAL RESPONSE
NSN5331-00-167-5111
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1090-41565 ITEM 15 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HARDNESS RATING: 75.0 SHORE DUROMETER A NOMINAL
•
TEMP RATING: -15.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
•
CENTER HOLE DIAMETER: 1.102 INCHES MINIMUM AND 1.122 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS7276 ASSN STD SINGLE MATERIAL RESPONSE
•
ELONGATION PERCENTAGE: 125 MAXIMUM
•
OUTSIDE DIAMETER: 1.302 INCHES MINIMUM AND 1.334 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
•
MATERIAL: RUBBER FLUOROCARBON CLASS FPM
TECHNICAL CHARACTERISTICS
HARDNESS RATING75.0 SHORE DUROMETER A NOMINAL
TEMP RATING-15.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
CENTER HOLE DIAMETER1.102 INCHES MINIMUM AND 1.122 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONAMS7276 ASSN STD SINGLE MATERIAL RESPONSE
ELONGATION PERCENTAGE125 MAXIMUM
OUTSIDE DIAMETER1.302 INCHES MINIMUM AND 1.334 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
MATERIALRUBBER FLUOROCARBON CLASS FPM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 39
18-106InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
AMS7276InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
AS3209-145InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
2-145V1164-75InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
AS3209-122InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
10117043InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLEDGOVERNMENT REGISTRY
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1090-41565 ITEM 15?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1090-41565 ITEM 15?
1090-41565 ITEM 15 is a O-RING.
What parts can replace 1090-41565 ITEM 15?
There are 39 known substitutes for 1090-41565 ITEM 15: 18-106, AMS7276, AS3209-145 and 36 more. Substitute compatibility should be verified for your specific system.
Is 1090-41565 ITEM 15 still available?
1090-41565 ITEM 15 is currently cancelled.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1090-41565 ITEM 15

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: September 2026