PartsTable
Technical Data Sheet
PartsTable / IT_GENERAL / 109-0014
109-0014 ✓ Verified by PartsTable
— · IT_GENERAL · SOFTWARE
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SOFTWARE is a the manufacturer industrial component. Key specifications include disk_size: 5.25, head_style: FILLISTER, head_height: 0.113 INCHES MINIMUM AND 0.123 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.212 INCHES MINIMUM AND 0.222 INCHES MAXIMUM IN, thread_length: 0.375 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-841-8349, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
IT_GENERAL→ SOFTWARE→ 109-0014
NSN: 5305-00-841-8349
FSC: 5305
CAGE: 13799 — H & E VENTURE, LLC (USA)
SPECIFICATIONS
disk_size5.25
head_styleFILLISTER
head_height0.113 INCHES MINIMUM AND 0.123 INCHES MAXIMUM IN
thread_class2A A
head_diameter0.212 INCHES MINIMUM AND 0.222 INCHES MAXIMUM IN
thread_length0.375 INCHES MAXIMUM IN
screw_materialSTEEL
fastener_length0.375 INCHES NOMINAL IN
thread_directionRIGHT-HAND
internal_drive_styleCROSS RECESS TYPE 1
nominal_thread_diameter0.138 INCHES IN
screw_surface_treatmentCADMIUM
NSN5305-00-841-8349
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 109-0014 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD LENGTH: 0.375 INCHES MAXIMUM IN
•
INTERNAL DRIVE STYLE: CROSS RECESS TYPE 1
•
THREAD SERIES DESIGNATOR: UNF
•
THREAD CLASS: 2A A
•
FASTENER LENGTH: 0.375 INCHES NOMINAL IN
•
THREAD QUANTITY PER INCH: 40
•
SCREW MATERIAL: STEEL
•
HEAD STYLE: FILLISTER
TECHNICAL CHARACTERISTICS (FLIS)
THREAD LENGTH0.375 INCHES MAXIMUM IN
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
THREAD SERIES DESIGNATORUNF
THREAD CLASS2A A
FASTENER LENGTH0.375 INCHES NOMINAL IN
THREAD QUANTITY PER INCH40
SCREW MATERIALSTEEL
HEAD STYLEFILLISTER
HEAD HEIGHT0.113 INCHES MINIMUM AND 0.123 INCHES MAXIMUM IN
HEAD DIAMETER0.212 INCHES MINIMUM AND 0.222 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
109-0014Interchangeable
interchangeable cross-reference
interchangeable
A109-2Interchangeable
interchangeable cross-reference
interchangeable
109-14Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 109-0014?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 109-0014?
109-0014 is a SOFTWARE. It is classified as a IT_GENERAL (SOFTWARE).
What parts can replace 109-0014?
There are 3 known substitutes for 109-0014: 109-0014, A109-2, 109-14. Substitute compatibility should be verified for your specific system.
What is the NSN for 109-0014?
109-0014 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-841-8349. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 109-0014

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026