PartsTable
Technical Data Sheet
Download PDF

10899366 — RESISTOR,FIXED,FILM

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

10899366: RESISTOR,FIXED,FILM.

The RESISTOR,FIXED,FILM is a the manufacturer industrial component. Key specifications include diameter: 0.750 INCHES NOMINAL IN, head_style: TEE NO. 5, body_length: 0.250 INCHES NOMINAL IN, head_length: 4.000 INCHES NOMINAL IN, body_diameter: 0.090 INCHES NOMINAL IN, cubic_measure: 0.002 CUBIC INCHES.

This part is cataloged in the U.S. Government catalog under NSN 5315-00-052-0110, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 10899366
NSN: 5315-00-052-0110
NIINs: 000520110, 011651710
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
diameter0.750 INCHES NOMINAL IN
head_styleTEE NO. 5
body_length0.250 INCHES NOMINAL IN
head_length4.000 INCHES NOMINAL IN
body_diameter0.090 INCHES NOMINAL IN
cubic_measure0.002 CUBIC INCHES
terminal_typeWIRE LEAD
chamfer_length0.500 INCHES NOMINAL IN
inclosure_typeENCAPSULATED
terminal_length1.500 INCHES NOMINAL IN
special_featuresLOCK PIN WITH CHAIN ATTACHED TO HEAD
style_designatorAXIAL TERMINAL EACH END
NSN5315-00-052-0110
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 10899366 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CHAMFER LENGTH: 0.500 INCHES NOMINAL IN
•
HOLE ARRANGEMENT STYLE: ONE END DRILLED
•
UNDER HEAD LENGTH: 4.000 INCHES NOMINAL IN
•
TEE BOLT CYLINDRICAL HEAD DIAMETER: 0.500 INCHES NOMINAL IN
•
PIN CHAMFER ANGLE: 20.0 DEGREES NOMINAL
•
FIRST HOLE DIAMETER: 0.219 INCHES NOMINAL IN
•
STYLE DESIGNATOR: STRAIGHT
•
DIAMETER: 0.750 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
CHAMFER LENGTH0.500 INCHES NOMINAL IN
HOLE ARRANGEMENT STYLEONE END DRILLED
UNDER HEAD LENGTH4.000 INCHES NOMINAL IN
TEE BOLT CYLINDRICAL HEAD DIAMETER0.500 INCHES NOMINAL IN
PIN CHAMFER ANGLE20.0 DEGREES NOMINAL
FIRST HOLE DIAMETER0.219 INCHES NOMINAL IN
STYLE DESIGNATORSTRAIGHT
DIAMETER0.750 INCHES NOMINAL IN
HEAD STYLETEE NO. 5
HEAD LENGTH4.000 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 2
3004973Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
5315000520110Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 10899366?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10899366?
10899366 is a RESISTOR,FIXED,FILM. It is classified as a MRO (MRO_GENERAL).
What parts can replace 10899366?
There are 2 known substitutes for 10899366: 3004973, 5315000520110. Substitute compatibility should be verified for your specific system.
What is the NSN for 10899366?
10899366 is cataloged in the U.S. Government catalog under NSN 5315-00-052-0110. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10899366

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.