PartsTable
Technical Data Sheet
Download PDF

10894407 — SEAL,NONMETALLIC SPECIAL SHAPED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

10894407: SEAL,NONMETALLIC SPECIAL SHAPED.

SEAL,NONMETALLIC SPECIAL SHAPED. Key specifications include construction: SOLID, end_cut_angle: 45.0 DEGREES, overall_length: 24.125 INCHES NOMINAL IN, fabrication_method: SOLID, cross-sectional_width: 0.719 INCHES NOMINAL IN, cross-sectional_height: 0.344 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-887-8923, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10894407
NSN: 5330-00-887-8923
FSC: 5330 — Packing and Gasket Materials
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
constructionSOLID
end_cut_angle45.0 DEGREES
overall_length24.125 INCHES NOMINAL IN
fabrication_methodSOLID
cross-sectional_width0.719 INCHES NOMINAL IN
cross-sectional_height0.344 INCHES NOMINAL IN
cross-sectional_shape_styleU SHAPE
cross_section_inside_diameter0.250 INCHES NOMINAL IN
NSN5330-00-887-8923
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10894407 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.344 INCHES NOMINAL IN
•
CROSS-SECTIONAL WIDTH: 0.719 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: U SHAPE
•
CROSS SECTION INSIDE DIAMETER: 0.250 INCHES NOMINAL IN
•
END CUT ANGLE: 45.0 DEGREES
•
FABRICATION METHOD: SOLID
•
CONSTRUCTION: SOLID
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.344 INCHES NOMINAL IN
CROSS-SECTIONAL WIDTH0.719 INCHES NOMINAL IN
OVERALL LENGTH24.125 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLEU SHAPE
CROSS SECTION INSIDE DIAMETER0.250 INCHES NOMINAL IN
END CUT ANGLE45.0 DEGREES
FABRICATION METHODSOLID
CONSTRUCTIONSOLID
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES 1
5330008878923Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Shelf-life managedAcquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 10894407?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10894407?
10894407 is a SEAL,NONMETALLIC SPECIAL SHAPED.
What parts can replace 10894407?
There is 1 known substitute for 10894407: 5330008878923. Substitute compatibility should be verified for your specific system.
What is the NSN for 10894407?
10894407 is cataloged in the U.S. Government catalog under NSN 5330-00-887-8923. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10894407