PartsTable
Technical Data Sheet
Download PDF

10892147 — PIN,SHOULDER,HEADED

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

10892147: PIN,SHOULDER,HEADED.

The PIN,SHOULDER,HEADED is a the manufacturer industrial component. Key specifications include height: 0.180 INCHES MINIMUM AND 0.185 INCHES MAXIMUM IN, material: STEEL COMP 1008 OR STEEL COMP B1113 OVERALL, head_style: FLAT, surface_finish: 125.0 MICROINCHES OVERALL, first_end_style: CHAMFERED, special_features: HEAD END AXIALLY DRILLED 0.875 DIA X 4.125 DEEP. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-871-2940, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10892147
NSN: 5315-00-871-2940
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
height0.180 INCHES MINIMUM AND 0.185 INCHES MAXIMUM IN
materialSTEEL COMP 1008 OR STEEL COMP B1113 OVERALL
head_styleFLAT
surface_finish125.0 MICROINCHES OVERALL
first_end_styleCHAMFERED
special_featuresHEAD END AXIALLY DRILLED 0.875 DIA X 4.125 DEEP
style_designatorSHOULDER
first_step_length4.437 INCHES NOMINAL IN
pin_head_diameter1.437 INCHES NOMINAL IN
surface_treatmentCADMIUM OVERALL
under_head_length5.690 INCHES NOMINAL IN
second_step_length1.253 INCHES NOMINAL IN
NSN5315-00-871-2940
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 10892147 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: 125.0 MICROINCHES OVERALL
•
FIRST END TAPER LENGTH: 0.062 INCHES NOMINAL IN
•
FIRST STEP DIAMETER: 1.249 INCHES NOMINAL IN
•
HOLE ARRANGEMENT STYLE: ONE END DRILLED
•
UNDER HEAD LENGTH: 5.690 INCHES NOMINAL IN
•
FIRST END STYLE: CHAMFERED
•
FIRST HOLE DIAMETER: 0.156 INCHES NOMINAL IN
•
SECOND STEP LENGTH: 1.253 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SURFACE FINISH125.0 MICROINCHES OVERALL
FIRST END TAPER LENGTH0.062 INCHES NOMINAL IN
FIRST STEP DIAMETER1.249 INCHES NOMINAL IN
HOLE ARRANGEMENT STYLEONE END DRILLED
UNDER HEAD LENGTH5.690 INCHES NOMINAL IN
FIRST END STYLECHAMFERED
FIRST HOLE DIAMETER0.156 INCHES NOMINAL IN
SECOND STEP LENGTH1.253 INCHES NOMINAL IN
STYLE DESIGNATORSHOULDER
PIN HEAD DIAMETER1.437 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 10892147?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10892147?
10892147 is a PIN,SHOULDER,HEADED.
What is the NSN for 10892147?
10892147 is cataloged in the U.S. Government catalog under NSN 5315-00-871-2940. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10892147