PartsTable
Technical Data Sheet
Download PDF

1088958 — WELDMENT,DOOR PROP

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

1088958: WELDMENT,DOOR PROP.

The WELDMENT,DOOR PROP is a the manufacturer industrial component. Key specifications include end_item_identification: SWEEPER,ROTARY,VEHICLE MOUNTING 3830-01-586-7713. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-364-2737, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1088958
NSN: 5310-00-364-2737
NIINs: 003642737, 016104702
FSC: 5310 — Nuts and Washers
CAGE: 12204 — CHRYSLER REALTY COMPANY LLC DBA DAIMLER CHRYSLER (USA)
SPECIFICATIONS
end_item_identificationSWEEPER,ROTARY,VEHICLE MOUNTING 3830-01-586-7713
NSN5310-00-364-2737
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 1088958 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.562 INCHES NOMINAL IN
•
THREAD SERIES: UNF
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.375 INCHES IN
•
CONE SEAT ANGLE: 45.00 DEGREES NOMINAL
•
LOCKING FEATURE: PREVAILING TORQUE ALL METAL DESIGN
•
NUT HEIGHT: 0.500 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.562 INCHES NOMINAL IN
THREAD SERIESUNF
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.375 INCHES IN
CONE SEAT ANGLE45.00 DEGREES NOMINAL
LOCKING FEATUREPREVAILING TORQUE ALL METAL DESIGN
NUT HEIGHT0.500 INCHES NOMINAL IN
SPECIAL FEATURESSIX EQUALLY SPACED SLOTS 0.031 INCHES IN WIDTH BY 0.188 INCH DEEP AT BEARING SURFACE END IN
SURFACE TREATMENTZINC OVERALL
NUT STYLECONE SEAT, HEXAGON
SUBSTITUTES & CROSS-REFERENCES 5
623370Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
3990G9069Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
852606Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
7410917Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
7378249Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 1088958?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1088958?
1088958 is a WELDMENT,DOOR PROP.
What parts can replace 1088958?
There are 5 known substitutes for 1088958: 623370, 3990G9069, 852606 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 1088958?
1088958 is cataloged in the U.S. Government catalog under NSN 5310-00-364-2737. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1088958

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.