10885891-4 — COVER,ACCESS

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

10885891-4: COVER,ACCESS.

The COVER,ACCESS is a the manufacturer industrial component. Key specifications include width: 25.750 INCHES NOMINAL IN, length: 45.000 INCHES NOMINAL IN, material: ALUMINUM ALLOY 6061 OR ALUMINUM ALLOY 5083, end_item_identification: 2350-01-369-6028; PERSONNEL CARRIERS, minimum_tensile_strength: 40000 POUNDS PER SQUARE INCH LBS, material_document_and_classification: QQ-A-250/6 FED SPEC 2ND MATERIAL RESPONSE AND QQ-A-250/7 FED SPEC 3RD MATERIAL RESPONSE. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-497-5208, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

10885891-4

NSN: 5340-01-497-5208
FSC: 5340 — Hardware, Commercial
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)

SPECIFICATIONS

width	25.750 INCHES NOMINAL IN
length	45.000 INCHES NOMINAL IN
material	ALUMINUM ALLOY 6061 OR ALUMINUM ALLOY 5083
end_item_identification	2350-01-369-6028; PERSONNEL CARRIERS
minimum_tensile_strength	40000 POUNDS PER SQUARE INCH LBS
material_document_and_classification	QQ-A-250/6 FED SPEC 2ND MATERIAL RESPONSE AND QQ-A-250/7 FED SPEC 3RD MATERIAL RESPONSE
NSN	5340-01-497-5208

COMPONENT DIAGRAM

KEY FEATURES

•

LENGTH: 45.000 INCHES NOMINAL IN

•

MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-250/6 FED SPEC 2ND MATERIAL RESPONSE AND QQ-A-250/7 FED SPEC 3RD MATERIAL RESPONSE

•

MINIMUM TENSILE STRENGTH: 40000 POUNDS PER SQUARE INCH LBS

•

MINIMUM YIELD STRENGTH: 28000 POUNDS PER SQUARE INCH LBS

•

WIDTH: 25.750 INCHES NOMINAL IN

•

MATERIAL: ALUMINUM ALLOY 6061 OR ALUMINUM ALLOY 5083

TECHNICAL CHARACTERISTICS

LENGTH	45.000 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-A-250/6 FED SPEC 2ND MATERIAL RESPONSE AND QQ-A-250/7 FED SPEC 3RD MATERIAL RESPONSE
SPECIAL FEATURES	ITEM HAS CUTOUTS; WITH TREADSIDE DOWN, AT TOP LEFT CORNER, RECTANGULAR, 5.000 INCHES ACROSS BY 3.000 DOWN; AT BOTTOM LEFT CORNER, RECTANGULAR, 1.750 ACROSS BY 0.500 UP; ON BOTTOM EDGE, A SEMICIRCULAR CUTOUT 1.000 RADIUS, CENTERED 28.875 INCHES FROM LEFT EDGE; A 2.000 INCH HOLE IS DRILLED WITH CENTER 2.250 DOWN FROM TOP EDGE, 25.125 FROM LEFT EDGE; FINISH PER CLASS 1A, MIL-C-5541 A
MINIMUM TENSILE STRENGTH	40000 POUNDS PER SQUARE INCH LBS
MINIMUM YIELD STRENGTH	28000 POUNDS PER SQUARE INCH LBS
WIDTH	25.750 INCHES NOMINAL IN
END ITEM IDENTIFICATION	2350-01-369-6028; PERSONNEL CARRIERS
MATERIAL	ALUMINUM ALLOY 6061 OR ALUMINUM ALLOY 5083

OTHER ITEMS IN FSC 5340 — Hardware, Commercial

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275

SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy 10885891-4?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 10885891-4?

10885891-4 is a COVER,ACCESS.

What is the NSN for 10885891-4?

10885891-4 is cataloged in the U.S. Government catalog under NSN 5340-01-497-5208. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

10885891-4 — COVER,ACCESS

Request a Quote — 10885891-4