PartsTable
Technical Data Sheet
Download PDF

10885163 — MOUNT,RESILIENT,UTILITY

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

10885163: MOUNT,RESILIENT,UTILITY.

The MOUNT,RESILIENT,UTILITY is a the manufacturer industrial component. Key specifications include height: 1.860 INCHES MINIMUM AND 1.960 INCHES MAXIMUM IN, bushing_length: 1.170 INCHES MINIMUM AND 1.190 INCHES MAXIMUM IN, inside_diameter: 0.440 INCHES MINIMUM AND 0.445 INCHES MAXIMUM IN, flange_thickness: 0.270 INCHES NOMINAL IN, style_designator: ROUND W/FLANGE EXT. FLANGE, major_outside_diameter: 1.050 INCHES MINIMUM AND 1.110 INCHES MAXIMUM IN.

This part is cataloged in the U.S. Government catalog under NSN 5340-01-046-4534, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10885163
NSN: 5340-01-046-4534
FSC: 5340 — Hardware, Commercial
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
height1.860 INCHES MINIMUM AND 1.960 INCHES MAXIMUM IN
bushing_length1.170 INCHES MINIMUM AND 1.190 INCHES MAXIMUM IN
inside_diameter0.440 INCHES MINIMUM AND 0.445 INCHES MAXIMUM IN
flange_thickness0.270 INCHES NOMINAL IN
style_designatorROUND W/FLANGE EXT. FLANGE
major_outside_diameter1.050 INCHES MINIMUM AND 1.110 INCHES MAXIMUM IN
minor_outside_diameter1.310 INCHES NOMINAL IN
NSN5340-01-046-4534
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10885163 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BUSHING LENGTH: 1.170 INCHES MINIMUM AND 1.190 INCHES MAXIMUM IN
•
FLANGE THICKNESS: 0.270 INCHES NOMINAL IN
•
STYLE DESIGNATOR: ROUND W/FLANGE EXT. FLANGE
•
MINOR OUTSIDE DIAMETER: 1.310 INCHES NOMINAL IN
•
INSIDE DIAMETER: 0.440 INCHES MINIMUM AND 0.445 INCHES MAXIMUM IN
•
HEIGHT: 1.860 INCHES MINIMUM AND 1.960 INCHES MAXIMUM IN
•
MAJOR OUTSIDE DIAMETER: 1.050 INCHES MINIMUM AND 1.110 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
BUSHING LENGTH1.170 INCHES MINIMUM AND 1.190 INCHES MAXIMUM IN
FLANGE THICKNESS0.270 INCHES NOMINAL IN
STYLE DESIGNATORROUND W/FLANGE EXT. FLANGE
MINOR OUTSIDE DIAMETER1.310 INCHES NOMINAL IN
INSIDE DIAMETER0.440 INCHES MINIMUM AND 0.445 INCHES MAXIMUM IN
HEIGHT1.860 INCHES MINIMUM AND 1.960 INCHES MAXIMUM IN
MAJOR OUTSIDE DIAMETER1.050 INCHES MINIMUM AND 1.110 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 2
22946Reference document
Same NSN cross-reference
Reference document — Secondary reference
5340010464534Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 10885163?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10885163?
10885163 is a MOUNT,RESILIENT,UTILITY.
What parts can replace 10885163?
There are 2 known substitutes for 10885163: 22946, 5340010464534. Substitute compatibility should be verified for your specific system.
What is the NSN for 10885163?
10885163 is cataloged in the U.S. Government catalog under NSN 5340-01-046-4534. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10885163

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.