PartsTable
Technical Data Sheet
Download PDF

108842 — PARTS KIT,PISTON ASSEMBLY,COMPRE

✓ Government record, cited
Hama · MRO · MRO_GENERAL
PRODUCT OVERVIEW

108842: PARTS KIT,PISTON ASSEMBLY,COMPRE.

PARTS KIT,PISTON ASSEMBLY,COMPRE. Key specifications include end_item_identification: 2320-01-552-2922; TRUCK TRACTOR, part_name_assigned_by_controlling_agency: PISTON AND ROD KIT. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-198-6132, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 108842
NSN: 5315-00-198-6132
NIINs: 001986132, 013289332, 013782962, 014524670, 015755447
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 82066 — INSO ELECTRONIC PRODUCTS INC BUNNELL J H DIV (USA)
SPECIFICATIONS
end_item_identification2320-01-552-2922; TRUCK TRACTOR
part_name_assigned_by_controlling_agencyPISTON AND ROD KIT
NSN5315-00-198-6132
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 108842 · Hama ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: 63.0 MICROINCHES SHANK END
•
FIRST END LOCATION: BOTH ENDS
•
FIRST END STYLE: OVAL
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD SINGLE MATERIAL RESPONSE OVERALL
•
PIN OVERALL LENGTH: 0.595 INCHES MINIMUM AND 0.655 INCHES MAXIMUM IN
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
•
PIN SIZE DESIGNATION: 4/0
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS
SURFACE FINISH63.0 MICROINCHES SHANK END
FIRST END LOCATIONBOTH ENDS
FIRST END STYLEOVAL
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD SINGLE MATERIAL RESPONSE OVERALL
PIN OVERALL LENGTH0.595 INCHES MINIMUM AND 0.655 INCHES MAXIMUM IN
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
PIN SIZE DESIGNATION4/0
MATERIALSTEEL OVERALL
FIRST END OUTER RADIUS0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 5
121332Reference document
Same NSN cross-reference
Reference document — Secondary reference
585Reference document
Same NSN cross-reference
Reference document — Secondary reference
385-40-5Reference document
Same NSN cross-reference
Reference document — Secondary reference
MS24692-79Reference document
Same NSN cross-reference
Reference document — Secondary reference
NASM24692Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 108842?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 108842?
108842 is a PARTS KIT,PISTON ASSEMBLY,COMPRE manufactured by Hama. It is classified as a MRO (MRO_GENERAL).
What parts can replace 108842?
There are 5 known substitutes for 108842: 121332, 585, 385-40-5 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 108842?
108842 is cataloged in the U.S. Government catalog under NSN 5315-00-198-6132. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 108842