PartsTable
Technical Data Sheet
Download PDF

10882088 — CLIP,RETAINING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

10882088: CLIP,RETAINING.

The CLIP,RETAINING is a the manufacturer industrial component. Key specifications include width: 0.620 INCHES NOMINAL IN, material: STEEL COMP 1050, overall_height: 2.400 INCHES NOMINAL IN, stock_diameter: 0.036 INCHES NOMINAL IN, special_features: TUBE D1A 0.240, style_designator: PIN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-168-7179, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10882088
NSN: 5340-00-168-7179
FSC: 5340 — Hardware, Commercial
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
width0.620 INCHES NOMINAL IN
materialSTEEL COMP 1050
overall_height2.400 INCHES NOMINAL IN
stock_diameter0.036 INCHES NOMINAL IN
special_featuresTUBE D1A 0.240
style_designatorPIN
casehardening_indicatorCASEHARDENED
material_hardness_rating40.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM
material_document_and_classificationQQ-S-777, COMP 1050-CANCELED FED SPEC SINGLE MATERIAL RESPONSE
NSN5340-00-168-7179
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10882088 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL HARDNESS RATING: 40.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM
•
STYLE DESIGNATOR: PIN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-777, COMP 1050-CANCELED FED SPEC SINGLE MATERIAL RESPONSE
•
STOCK DIAMETER: 0.036 INCHES NOMINAL IN
•
CASEHARDENING INDICATOR: CASEHARDENED
•
WIDTH: 0.620 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT2.400 INCHES NOMINAL IN
MATERIAL HARDNESS RATING40.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM
STYLE DESIGNATORPIN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-777, COMP 1050-CANCELED FED SPEC SINGLE MATERIAL RESPONSE
STOCK DIAMETER0.036 INCHES NOMINAL IN
CASEHARDENING INDICATORCASEHARDENED
SPECIAL FEATURESTUBE D1A 0.240
WIDTH0.620 INCHES NOMINAL IN
MATERIALSTEEL COMP 1050
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
5340001687179Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 10882088?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10882088?
10882088 is a CLIP,RETAINING.
What parts can replace 10882088?
There is 1 known substitute for 10882088: 5340001687179. Substitute compatibility should be verified for your specific system.
What is the NSN for 10882088?
10882088 is cataloged in the U.S. Government catalog under NSN 5340-00-168-7179. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10882088