PartsTable
Technical Data Sheet
Download PDF

10872377 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

10872377: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include hardness_rating: 60.0 SHORE DUROMETER A NOMINAL OVERALL, outside_diameter: 2.000 INCHES NOMINAL IN, style_designator: CIRCULAR, aperture_diameter: 1.375 INCHES MINIMUM AND 1.385 INCHES MAXIMUM IN, cross-sectional_thickness: 0.125 INCHES NOMINAL IN, cross-sectional_shape_style: SOLID SINGLE OR COMPOSITION. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-999-9647, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10872377
NSN: 5330-00-999-9647
FSC: 5330 — Packing and Gasket Materials
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
hardness_rating60.0 SHORE DUROMETER A NOMINAL OVERALL
outside_diameter2.000 INCHES NOMINAL IN
style_designatorCIRCULAR
aperture_diameter1.375 INCHES MINIMUM AND 1.385 INCHES MAXIMUM IN
cross-sectional_thickness0.125 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
NSN5330-00-999-9647
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10872377 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.125 INCHES NOMINAL IN
•
HARDNESS RATING: 60.0 SHORE DUROMETER A NOMINAL OVERALL
•
STYLE DESIGNATOR: CIRCULAR
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
OUTSIDE DIAMETER: 2.000 INCHES NOMINAL IN
•
APERTURE DIAMETER: 1.375 INCHES MINIMUM AND 1.385 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.125 INCHES NOMINAL IN
HARDNESS RATING60.0 SHORE DUROMETER A NOMINAL OVERALL
STYLE DESIGNATORCIRCULAR
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OUTSIDE DIAMETER2.000 INCHES NOMINAL IN
APERTURE DIAMETER1.375 INCHES MINIMUM AND 1.385 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 1
A2856Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 10872377?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10872377?
10872377 is a GASKET.
What parts can replace 10872377?
There is 1 known substitute for 10872377: A2856. Substitute compatibility should be verified for your specific system.
What is the NSN for 10872377?
10872377 is cataloged in the U.S. Government catalog under NSN 5330-00-999-9647. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10872377