The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include first_leg_angle: 101.0 DEGREES NOMINAL, first_leg_style: SQUARE, first_leg_width: 3.750 INCHES NOMINAL IN, first_leg_length: 0.875 INCHES NOMINAL IN, second_leg_style: ANGLE, style_designator: ANGLE. This part is cataloged in the U.S.
Government catalog under NSN 5340-00-479-2956, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
10866149
NSN:5340-00-479-2956 FSC:5340 — Hardware, Commercial CAGE:19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
first_leg_angle
101.0 DEGREES NOMINAL
first_leg_style
SQUARE
first_leg_width
3.750 INCHES NOMINAL IN
first_leg_length
0.875 INCHES NOMINAL IN
second_leg_style
ANGLE
special_features
ANGLE LOCATED ON LEFT SIDE OF SECOND LEG 0.500 IN. FROM TOP EDGE ALONG LENGTH LOWER RIGHT HAND CORNER OF SECOND LEG CUT AT 0.250 IN. BY 45 DEG ANGLE IN
style_designator
ANGLE
second_leg_length
1.563 INCHES NOMINAL IN
first_leg_thickness
0.060 INCHES NOMINAL IN
second_leg_end_width
0.750 INCHES NOMINAL IN
second_leg_thickness
0.060 INCHES NOMINAL IN
first_leg_hole_diameter
0.406 INCHES MINIMUM AND 0.422 INCHES MAXIMUM IN
NSN
5340-00-479-2956
COMPONENT DIAGRAM
KEY FEATURES
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.312 INCHES NOMINAL IN
•
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.406 INCHES MINIMUM AND 0.469 INCHES MAXIMUM IN
•
FIRST LEG HOLE DIAMETER: 0.406 INCHES MINIMUM AND 0.422 INCHES MAXIMUM IN
•
FIRST LEG ANGLE: 101.0 DEGREES NOMINAL
•
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH: 0.422 INCHES MINIMUM AND 0.781 INCHES MAXIMUM IN
•
SECOND LEG HOLE DIAMETER: 0.281 INCHES MINIMUM AND 0.297 INCHES MAXIMUM IN
•
SECOND LEG LENGTH: 1.563 INCHES NOMINAL IN
•
FIRST LEG HOLE ARRANGEMENT STYLE: TWO HOLES
TECHNICAL CHARACTERISTICS
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH
0.312 INCHES NOMINAL IN
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH
0.406 INCHES MINIMUM AND 0.469 INCHES MAXIMUM IN
FIRST LEG HOLE DIAMETER
0.406 INCHES MINIMUM AND 0.422 INCHES MAXIMUM IN
FIRST LEG ANGLE
101.0 DEGREES NOMINAL
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH
0.422 INCHES MINIMUM AND 0.781 INCHES MAXIMUM IN
SECOND LEG HOLE DIAMETER
0.281 INCHES MINIMUM AND 0.297 INCHES MAXIMUM IN
SECOND LEG LENGTH
1.563 INCHES NOMINAL IN
FIRST LEG HOLE ARRANGEMENT STYLE
TWO HOLES
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10866149?
10866149 is a BRACKET,ANGLE.
What parts can replace 10866149?
There is 1 known substitute for 10866149: 1070799. Substitute compatibility should be verified for your specific system.
What is the NSN for 10866149?
10866149 is cataloged in the U.S. Government catalog under NSN 5340-00-479-2956. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.