PartsTable
Technical Data Sheet
Download PDF

10861496 — PIN,STRAIGHT,HEADLESS

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

10861496: PIN,STRAIGHT,HEADLESS.

The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include surface_finish: 125.0 MICROINCHES OUTSIDE DIAMETER, first_end_style: CHAMFERED, surface_treatment: CADMIUM AND CHROMATE OVERALL, pin_overall_length: 3.376 INCHES MINIMUM AND 3.500 INCHES MAXIMUM IN, first_hole_diameter: 0.125 INCHES MINIMUM AND 0.156 INCHES MAXIMUM IN, pin_overall_diameter: 0.3750 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-933-5224, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10861496
NSN: 5315-00-933-5224
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
materialSTEEL COMP 1010 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1018 OR STEEL COMP 1025 OR STEEL COMP 1030 OR STEEL COMP 1035 OR STEEL COMP 1040 OR STEEL COMP 1045 OVERALL
surface_finish125.0 MICROINCHES OUTSIDE DIAMETER
first_end_styleCHAMFERED
surface_treatmentCADMIUM AND CHROMATE OVERALL
pin_overall_length3.376 INCHES MINIMUM AND 3.500 INCHES MAXIMUM IN
first_hole_diameter0.125 INCHES MINIMUM AND 0.156 INCHES MAXIMUM IN
pin_overall_diameter0.3750 INCHES NOMINAL IN
first_end_taper_angle45.0 DEGREES NOMINAL
first_end_taper_length0.031 INCHES MINIMUM AND 0.062 INCHES MAXIMUM IN
hole_arrangement_styleONE END DRILLED
second_end_relationship_with_first_endIDENTICAL
distance_from_centerline_of_hole_to_end_of_pin0.688 INCHES NOMINAL IN
NSN5315-00-933-5224
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 10861496 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: 125.0 MICROINCHES OUTSIDE DIAMETER
•
FIRST END TAPER LENGTH: 0.031 INCHES MINIMUM AND 0.062 INCHES MAXIMUM IN
•
HOLE ARRANGEMENT STYLE: ONE END DRILLED
•
FIRST END STYLE: CHAMFERED
•
FIRST HOLE DIAMETER: 0.125 INCHES MINIMUM AND 0.156 INCHES MAXIMUM IN
•
FIRST END TAPER ANGLE: 45.0 DEGREES NOMINAL
•
PIN OVERALL DIAMETER: 0.3750 INCHES NOMINAL IN
•
PIN OVERALL LENGTH: 3.376 INCHES MINIMUM AND 3.500 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
SURFACE FINISH125.0 MICROINCHES OUTSIDE DIAMETER
FIRST END TAPER LENGTH0.031 INCHES MINIMUM AND 0.062 INCHES MAXIMUM IN
HOLE ARRANGEMENT STYLEONE END DRILLED
FIRST END STYLECHAMFERED
FIRST HOLE DIAMETER0.125 INCHES MINIMUM AND 0.156 INCHES MAXIMUM IN
FIRST END TAPER ANGLE45.0 DEGREES NOMINAL
PIN OVERALL DIAMETER0.3750 INCHES NOMINAL IN
PIN OVERALL LENGTH3.376 INCHES MINIMUM AND 3.500 INCHES MAXIMUM IN
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES 1
5315009335224Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 10861496?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10861496?
10861496 is a PIN,STRAIGHT,HEADLESS.
What parts can replace 10861496?
There is 1 known substitute for 10861496: 5315009335224. Substitute compatibility should be verified for your specific system.
What is the NSN for 10861496?
10861496 is cataloged in the U.S. Government catalog under NSN 5315-00-933-5224. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10861496

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.