PartsTable
Technical Data Sheet
Download PDF

10860-1 — SCREW,CAP,HEXAGON HEAD

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

10860-1: SCREW,CAP,HEXAGON HEAD.

The SCREW,CAP,HEXAGON HEAD is a the manufacturer industrial component. Key specifications include end_item_identification: ACTUATOR, VAL E/I FSCM 03950. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-713-0528, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10860-1
NSN: 5310-00-713-0528
NIINs: 007130528, 011642325, 014560888
FSC: 5310 — Nuts and Washers
CAGE: 36452 — DRS TECHNOLOGIES CANADA LTD (CAN)
SPECIFICATIONS
end_item_identificationACTUATOR, VAL E/I FSCM 03950
NSN5310-00-713-0528
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 10860-1 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 0.362 INCHES MINIMUM AND 0.372 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.004 INCHES MINIMUM AND 0.008 INCHES MAXIMUM IN
•
SURFACE TREATMENT: PASSIVATE OVERALL
•
MATERIAL: STEEL CORROSION RESISTING OVERALL
•
HOLE DIAMETER: 0.260 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.020 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN
OUTSIDE DIAMETER0.362 INCHES MINIMUM AND 0.372 INCHES MAXIMUM IN
MATERIAL THICKNESS0.004 INCHES MINIMUM AND 0.008 INCHES MAXIMUM IN
SURFACE TREATMENTPASSIVATE OVERALL
MATERIALSTEEL CORROSION RESISTING OVERALL
HOLE DIAMETER0.260 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 8
1087-109Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
13153617-1Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
M149-245Reference document
Same NSN cross-reference
Reference document — Secondary reference
1070877-1Reference document
Same NSN cross-reference
Reference document — Secondary reference
600800-01Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
123-1633Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 10860-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10860-1?
10860-1 is a SCREW,CAP,HEXAGON HEAD.
What parts can replace 10860-1?
There are 8 known substitutes for 10860-1: 1087-109, 13153617-1, M149-245 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 10860-1?
10860-1 is cataloged in the U.S. Government catalog under NSN 5310-00-713-0528. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10860-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.