PartsTable
Technical Data Sheet
Download PDF

10855-1 — SHAFT,AXLE,AUTOMOTIVE

✓ Government record, cited
Hama · MRO · MRO_GENERAL
PRODUCT OVERVIEW

10855-1: SHAFT,AXLE,AUTOMOTIVE.

- Cover which protects the iPhone 4 against dirt and scratches - Openings for full access to connections and controls - Slim, stylish cover - The iPhone 4 remains fully operational (the cover is attached to the back). This part is cataloged in the U.S. Government catalog under NSN 5930-00-944-9449, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 10855-1
NSN: 5930-00-944-9449
NIINs: 009449449, 011603649
FSC: 5930 — Switches
CAGE: 65597 — THALES USA, INC. DIV AIR MOBILITY SOLUTIONS ("AMS") (USA)
SPECIFICATIONS
shaft_typeROUND SINGLE ACTUATOR
shaft_length0.500 INCHES NOMINAL SINGLE ACTUATOR IN
thread_class2A SINGLE MOUNTING FACILITY A
pole_quantity3 EACH SECTION REAR
terminal_typeTAB, SOLDER LUG
thread_length0.250 INCHES NOMINAL SINGLE MOUNTING FACILITY IN
overall_length2.375 INCHES NOMINAL IN
shaft_diameter0.125 INCHES NOMINAL SINGLE ACTUATOR IN
throw_quantity2 EACH SECTION REAR
mounting_methodTHREADED BUSHING SINGLE MOUNTING FACILITY
overall_diameter0.500 INCHES NOMINAL IN
style_designatorSNAP OR LINE
NSN5930-00-944-9449
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR MFR: Hama SHAFT,AXLE,AUTOMOTIVE TITLE COMPONENT PN 10855-1 MFR Hama SHAFT,AXLE,AUTOMOTIVE
KEY FEATURES
•
SHAFT TYPE: ROUND SINGLE ACTUATOR
•
SHAFT DIAMETER: 0.125 INCHES NOMINAL SINGLE ACTUATOR IN
•
SWITCH CONTACT BASIC DESIGN: NONPILE-UP SYMMETRICAL
•
TERMINAL TYPE: TAB, SOLDER LUG
•
OVERALL DIAMETER: 0.500 INCHES NOMINAL IN
•
CONTACT LOAD CURRENT RATING: 1.0 AMPERES RESISTIVE LOAD AC AT SEA LEVEL
•
MOUNTING METHOD: THREADED BUSHING SINGLE MOUNTING FACILITY
•
THREAD LENGTH: 0.250 INCHES NOMINAL SINGLE MOUNTING FACILITY IN
TECHNICAL CHARACTERISTICS
SHAFT TYPEROUND SINGLE ACTUATOR
SHAFT DIAMETER0.125 INCHES NOMINAL SINGLE ACTUATOR IN
SWITCH CONTACT BASIC DESIGNNONPILE-UP SYMMETRICAL
TERMINAL TYPETAB, SOLDER LUG
OVERALL DIAMETER0.500 INCHES NOMINAL IN
CONTACT LOAD CURRENT RATING1.0 AMPERES RESISTIVE LOAD AC AT SEA LEVEL
MOUNTING METHODTHREADED BUSHING SINGLE MOUNTING FACILITY
THREAD LENGTH0.250 INCHES NOMINAL SINGLE MOUNTING FACILITY IN
POLE QUANTITY3 EACH SECTION REAR
STYLE DESIGNATORSNAP OR LINE
SUBSTITUTES & CROSS-REFERENCES 1
38-GM-2, 1/2IN SHAFTReference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required
Ready to buy 10855-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10855-1?
10855-1 is a SHAFT,AXLE,AUTOMOTIVE manufactured by Hama. It is classified as a MRO (MRO_GENERAL).
What parts can replace 10855-1?
There is 1 known substitute for 10855-1: 38-GM-2, 1/2IN SHAFT. Substitute compatibility should be verified for your specific system.
What is the NSN for 10855-1?
10855-1 is cataloged in the U.S. Government catalog under NSN 5930-00-944-9449. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10855-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.