PartsTable
Technical Data Sheet
Download PDF

1084-001 — OSCILLATOR,NONCRYSTAL CONTROLLED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

1084-001: OSCILLATOR,NONCRYSTAL CONTROLLED.

OSCILLATOR,NONCRYSTAL CONTROLLED. Key specifications include material: RUBBER SYNTHETIC, control_type: LOCAL, inclosure_type: ENCASED, style_designator: STRAIGHT THRU Y-PATTERN, basic_shape_style: RECTANGULAR OR SQUARE, flow_control_device: DIAPHRAGM. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-032-3826, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1084-001
NSN: 5331-00-032-3826
NIINs: 000323826, 012020731, 014977536, 015419472
FSC: 5331 — O-ring
CAGE: 30187 — GRAHAM-WHITE MANUFACTURING CO DIV GRAHAM-WHITE MANUFACTURING CO. INC. (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC
control_typeLOCAL
inclosure_typeENCASED
style_designatorSTRAIGHT THRU Y-PATTERN
basic_shape_styleRECTANGULAR OR SQUARE
flow_control_deviceDIAPHRAGM
installation_designMECHANICAL
center_hole_diameter0.294 INCHES MINIMUM AND 0.308 INCHES MAXIMUM IN
cross-sectional_height0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
end_item_identificationHX REACTOR BOUNDRY AREA
average_life_measurementNOT RATED
operating_control_methodMANUAL
NSN5331-00-032-3826
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1084-001 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 0.294 INCHES MINIMUM AND 0.308 INCHES MAXIMUM IN
•
MATERIAL: RUBBER SYNTHETIC
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
CENTER HOLE DIAMETER0.294 INCHES MINIMUM AND 0.308 INCHES MAXIMUM IN
MATERIALRUBBER SYNTHETIC
SUBSTITUTES & CROSS-REFERENCES 1
1084VReference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 1084-001?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1084-001?
1084-001 is a OSCILLATOR,NONCRYSTAL CONTROLLED.
What parts can replace 1084-001?
There is 1 known substitute for 1084-001: 1084V. Substitute compatibility should be verified for your specific system.
What is the NSN for 1084-001?
1084-001 is cataloged in the U.S. Government catalog under NSN 5331-00-032-3826. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1084-001