PartsTable
Technical Data Sheet
PartsTable / MRO / 108274
108274 ✓ Verified by PartsTable
Hama · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The EJECTOR SUBASSEMBLY is a Hama industrial component. Key specifications include diameter: 0.167 INCHES NOMINAL IN, overall_width: 0.375 INCHES NOMINAL IN, style_designator: SINGLE LOOP, material_thickness: 0.040 INCHES NOMINAL IN, loop_inside_diameter: 0.090 INCHES NOMINAL IN, distance_from_loop_center_to_tongue_end: 0.451 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-061-2057, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 108274
NSN: 5340-00-061-2057
FSC: 5340
CAGE: 21340 — ITT TELECOM PRODUCTS CORP NETWORK SYSTEMS DIV (USA)
SPECIFICATIONS
diameter0.167 INCHES NOMINAL IN
overall_width0.375 INCHES NOMINAL IN
style_designatorSINGLE LOOP
material_thickness0.040 INCHES NOMINAL IN
loop_inside_diameter0.090 INCHES NOMINAL IN
distance_from_loop_center_to_tongue_end0.451 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.291 INCHES NOMINAL IN
NSN5340-00-061-2057
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 108274 MFR: Hama ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DIAMETER: 0.167 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.451 INCHES NOMINAL IN
•
STYLE DESIGNATOR: SINGLE LOOP
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.291 INCHES NOMINAL IN
•
LOOP INSIDE DIAMETER: 0.090 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.040 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
DIAMETER0.167 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END0.451 INCHES NOMINAL IN
STYLE DESIGNATORSINGLE LOOP
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.291 INCHES NOMINAL IN
OVERALL WIDTH0.375 INCHES NOMINAL IN
LOOP INSIDE DIAMETER0.090 INCHES NOMINAL IN
MATERIAL THICKNESS0.040 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
108274Interchangeable
interchangeable cross-reference
interchangeable
50379-3Interchangeable
interchangeable cross-reference
interchangeable
3324TInterchangeable
interchangeable cross-reference
interchangeable
36512-1AInterchangeable
interchangeable cross-reference
interchangeable
M-1896Interchangeable
interchangeable cross-reference
interchangeable
36512Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 108274?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 108274?
108274 is a EJECTOR SUBASSEMBLY manufactured by Hama. It is classified as a MRO (MRO_GENERAL).
What parts can replace 108274?
There are 8 known substitutes for 108274: 108274, 50379-3, 3324T and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 108274?
108274 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-061-2057. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 108274

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026