PartsTable
Technical Data Sheet
Download PDF

10823-02718 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

10823-02718: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, overall_width: 0.750 INCHES NOMINAL IN, style_designator: SINGLE LOOP, material_diameter: 0.048 INCHES NOMINAL IN, material_thickness: 0.03125 INCHES NOMINAL IN, loop_inside_diameter: 1.310 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-480-7057, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10823-02718
NSN: 5340-01-480-7057
FSC: 5340 — Hardware, Commercial
CAGE: 3CN46 — FASTENAL COMPANY (USA)
SPECIFICATIONS
materialSTEEL OVERALL
overall_width0.750 INCHES NOMINAL IN
style_designatorSINGLE LOOP
material_diameter0.048 INCHES NOMINAL IN
material_thickness0.03125 INCHES NOMINAL IN
loop_inside_diameter1.310 INCHES NOMINAL IN
end_item_identification2320-01-465-2174
center_to_center_distance_between_loop_and_mounting_hole1.160 INCHES NOMINAL IN
NSN5340-01-480-7057
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10823-02718 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DIAMETER: 0.048 INCHES NOMINAL IN
•
STYLE DESIGNATOR: SINGLE LOOP
•
MATERIAL THICKNESS: 0.03125 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 1.160 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
LOOP INSIDE DIAMETER: 1.310 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
MATERIAL DIAMETER0.048 INCHES NOMINAL IN
STYLE DESIGNATORSINGLE LOOP
OVERALL WIDTH0.750 INCHES NOMINAL IN
MATERIAL THICKNESS0.03125 INCHES NOMINAL IN
END ITEM IDENTIFICATION2320-01-465-2174
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE1.160 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
LOOP INSIDE DIAMETER1.310 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
3264355Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 10823-02718?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10823-02718?
10823-02718 is a CLAMP,LOOP.
What parts can replace 10823-02718?
There is 1 known substitute for 10823-02718: 3264355. Substitute compatibility should be verified for your specific system.
What is the NSN for 10823-02718?
10823-02718 is cataloged in the U.S. Government catalog under NSN 5340-01-480-7057. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10823-02718