PartsTable
Technical Data Sheet
Download PDF

1081473-2 — CAM FOLLOWER,NEEDLE BEARING

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

1081473-2: CAM FOLLOWER,NEEDLE BEARING.

The CAM FOLLOWER,NEEDLE BEARING is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, stud_length: 0.6250 INCHES NOMINAL IN, thread_class: 3A A, stud_diameter: 0.2500 INCHES NOMINAL IN, thread_length: 0.4375 INCHES NOMINAL IN, overall_length: 1.0625 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-157-0525, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1081473-2
NSN: 3110-00-157-0525
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 56232 — LOCKHEED MARTIN CORPORATION DIV RMS - MITCHEL FIELD (USA)
SPECIFICATIONS
materialSTEEL OVERALL
stud_length0.6250 INCHES NOMINAL IN
thread_class3A A
stud_diameter0.2500 INCHES NOMINAL IN
thread_length0.4375 INCHES NOMINAL IN
overall_length1.0625 INCHES NOMINAL IN
outer_ring_width0.4060 INCHES NOMINAL IN
special_featuresMEANS FOR RELUBRICATION
style_designatorCAM FOLLOWER
thread_directionRIGHT-HAND
nominal_thread_size0.250 INCHES IN
lubrication_materialGREASE
NSN3110-00-157-0525
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 1081473-2 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LUBRICATION MATERIAL: GREASE
•
OUTER RING WIDTH: 0.4060 INCHES NOMINAL IN
•
THREAD LENGTH: 0.4375 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CAM FOLLOWER
•
OVERALL OUTSIDE DIAMETER: 0.6250 INCHES NOMINAL IN
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.250 INCHES IN
TECHNICAL CHARACTERISTICS
LUBRICATION MATERIALGREASE
OUTER RING WIDTH0.4060 INCHES NOMINAL IN
THREAD LENGTH0.4375 INCHES NOMINAL IN
STYLE DESIGNATORCAM FOLLOWER
OVERALL LENGTH1.0625 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER0.6250 INCHES NOMINAL IN
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.250 INCHES IN
STUD LENGTH0.6250 INCHES NOMINAL IN
SPECIAL FEATURESMEANS FOR RELUBRICATION
SUBSTITUTES & CROSS-REFERENCES 4
CTA9-13Reference document
Same NSN cross-reference
Reference document — Secondary reference
2031932-2Reference document
Same NSN cross-reference
Reference document — Secondary reference
CR10Reference document
Same NSN cross-reference
Reference document — Secondary reference
CR10ANG25Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 1081473-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1081473-2?
1081473-2 is a CAM FOLLOWER,NEEDLE BEARING.
What parts can replace 1081473-2?
There are 4 known substitutes for 1081473-2: CTA9-13, 2031932-2, CR10 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 1081473-2?
1081473-2 is cataloged in the U.S. Government catalog under NSN 3110-00-157-0525. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1081473-2

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.