PartsTable
Technical Data Sheet
Download PDF

10813193 — HANDLE,MANUAL CONTROL

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

10813193: HANDLE,MANUAL CONTROL.

The HANDLE,MANUAL CONTROL is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 6061 HANDLE, groove_width: 0.135 INCHES NOMINAL0.135 INCHES NOMINAL IN, handle_height: 0.310 INCHES NOMINAL0.310 INCHES NOMINAL IN, overall_width: 0.370 INCHES NOMINAL0.370 INCHES NOMINAL IN, overall_length: 2.000 INCHES NOMINAL2.000 INCHES NOMINAL IN, mounting_method: UNTHREADED HOLE(S)UNTHREADED HOLE(S). This part is cataloged in the U.S.

Government catalog under NSN 5340-01-114-7567, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10813193
NSN: 5340-01-114-7567
FSC: 5340 — Hardware, Commercial
CAGE: 18876 — US ARMY AVIATION AND MISSILE COMMAND (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 6061 HANDLE
groove_width0.135 INCHES NOMINAL0.135 INCHES NOMINAL IN
handle_height0.310 INCHES NOMINAL0.310 INCHES NOMINAL IN
overall_width0.370 INCHES NOMINAL0.370 INCHES NOMINAL IN
overall_length2.000 INCHES NOMINAL2.000 INCHES NOMINAL IN
mounting_methodUNTHREADED HOLE(S)UNTHREADED HOLE(S)
style_designatorDOUBLE CAM
mounting_facility_diameter0.062 INCHES MINIMUM AND 0.062 INCHES MINIMUM AND 0.065 INCHES MAXIMUM0.065 INCHES MAXIMUM IN
mounting_facility_quantity22
material_document_and_classificationQQ-A-225/8,T6 FED SPEC SINGLE MATERIAL RESPONSE HANDLE
center_to_center_distance_between_mounting_facilities_parallel_to_length1.700 INCHES NOMINAL1.700 INCHES NOMINAL IN
NSN5340-01-114-7567
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10813193 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING FACILITY DIAMETER: 0.062 INCHES MINIMUM AND 0.062 INCHES MINIMUM AND 0.065 INCHES MAXIMUM0.065 INCHES MAXIMUM IN
•
MOUNTING FACILITY QUANTITY: 22
•
HANDLE HEIGHT: 0.310 INCHES NOMINAL0.310 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH: 1.700 INCHES NOMINAL1.700 INCHES NOMINAL IN
•
MOUNTING METHOD: UNTHREADED HOLE(S)UNTHREADED HOLE(S)
•
STYLE DESIGNATOR: DOUBLE CAM
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-225/8,T6 FED SPEC SINGLE MATERIAL RESPONSE HANDLE
TECHNICAL CHARACTERISTICS
MOUNTING FACILITY DIAMETER0.062 INCHES MINIMUM AND 0.062 INCHES MINIMUM AND 0.065 INCHES MAXIMUM0.065 INCHES MAXIMUM IN
MOUNTING FACILITY QUANTITY22
HANDLE HEIGHT0.310 INCHES NOMINAL0.310 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH1.700 INCHES NOMINAL1.700 INCHES NOMINAL IN
MOUNTING METHODUNTHREADED HOLE(S)UNTHREADED HOLE(S)
STYLE DESIGNATORDOUBLE CAM
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-225/8,T6 FED SPEC SINGLE MATERIAL RESPONSE HANDLE
OVERALL LENGTH2.000 INCHES NOMINAL2.000 INCHES NOMINAL IN
OVERALL WIDTH0.370 INCHES NOMINAL0.370 INCHES NOMINAL IN
MATERIALALUMINUM ALLOY 6061 HANDLE
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
10183193Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 10813193?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10813193?
10813193 is a HANDLE,MANUAL CONTROL.
What parts can replace 10813193?
There is 1 known substitute for 10813193: 10183193. Substitute compatibility should be verified for your specific system.
What is the NSN for 10813193?
10813193 is cataloged in the U.S. Government catalog under NSN 5340-01-114-7567. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10813193

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.