PartsTable
Technical Data Sheet
Download PDF

10803-8 — SOCKET,PLUG-IN ELECTRONIC COMPON

✓ Government record, cited
ZAGG · BOLT SCREW
PRODUCT OVERVIEW

10803-8: SOCKET,PLUG-IN ELECTRONIC COMPON.

SOCKET,PLUG-IN ELECTRONIC COMPON. Key specifications include material: RUBBER SYNTHETIC SEALING ELEMENT, unit_type: TRANSMISSION LINE, block_type: SNATCH, body_style: BARRIER TYPE, head_style: PAN NO. 2, body_length: 1.000 INCHES NOMINAL IN.

This part is cataloged in the U.S. Government catalog under NSN 5305-00-494-9197, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10803-8
NSN: 5305-00-494-9197
NIINs: 004949197, 005830838, 009836115, 010299184, 011939597, 014998729, 015095587
FSC: 5305 — Screws
CAGE: 24321 — ATLANTIC INERTIAL SYSTEMS INC (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC SEALING ELEMENT
unit_typeTRANSMISSION LINE
block_typeSNATCH
body_styleBARRIER TYPE
head_stylePAN NO. 2
body_length1.000 INCHES NOMINAL IN
design_typeBIDIRECTIONAL
head_height0.068 INCHES MAXIMUM IN
load_rating5000.0 POUNDS MAXIMUM LBS
bearing_typePLAIN
shell_length5.490 INCHES MINIMUM AND 6.250 INCHES MAXIMUM IN
thread_class2A A
NSN5305-00-494-9197
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 10803-8 · ZAGG ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.068 INCHES MAXIMUM IN
•
FASTENER LENGTH: 0.250 INCHES NOMINAL IN
•
THREAD LENGTH: 0.225 INCHES NOMINAL IN
•
NOMINAL THREAD DIAMETER: 0.112 INCHES IN
•
HEAD STYLE: PAN NO. 2
•
THREAD DIRECTION: RIGHT-HAND
•
SCREW MATERIAL: STEEL CORROSION RESISTING
•
INTERNAL DRIVE STYLE: SLOT
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.068 INCHES MAXIMUM IN
FASTENER LENGTH0.250 INCHES NOMINAL IN
THREAD LENGTH0.225 INCHES NOMINAL IN
NOMINAL THREAD DIAMETER0.112 INCHES IN
HEAD STYLEPAN NO. 2
THREAD DIRECTIONRIGHT-HAND
SCREW MATERIALSTEEL CORROSION RESISTING
INTERNAL DRIVE STYLESLOT
THREAD CLASS2A A
THREAD QUANTITY PER INCH40
SUBSTITUTES & CROSS-REFERENCES 2
0111.0034.JSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
THSI0803Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 10803-8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10803-8?
10803-8 is a SOCKET,PLUG-IN ELECTRONIC COMPON manufactured by ZAGG.
What parts can replace 10803-8?
There are 2 known substitutes for 10803-8: 0111.0034.J, THSI0803. Substitute compatibility should be verified for your specific system.
What is the NSN for 10803-8?
10803-8 is cataloged in the U.S. Government catalog under NSN 5305-00-494-9197. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10803-8

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.