PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 108-16510
108-16510 ✓ Verified by PartsTable
— · HOSE FITTING
WHAT YOU NEED TO KNOW
PTFE tape on tapered threads (NPT/BSPT) JIC/AN flare connections seal metal-to-metal — no tape
NPT != BSPT — look identical, NOT interchangeable
PRODUCT OVERVIEW

The SLEEVE,CLINCH,TUBE FITTING is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1213 OR STEEL COMP 1117 OR STEEL COMP 1118 OR STEEL COMP 1137, flange_width: 0.116 INCHES MINIMUM AND 0.122 INCHES MAXIMUM IN, overall_length: 0.412 INCHES MINIMUM AND 0.418 INCHES MAXIMUM IN, style_designator: FLARELESS, seat_angle_in_deg: 40.0, surface_treatment: CADMIUM OR CHROMATE. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4730-00-277-9731, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
108-16510
NSN: 4730-00-277-9731
FSC: 4730
CAGE: 79470 — DANA CORP WEATHERHEAD DIV (USA)
SPECIFICATIONS
materialSTEEL COMP 1213 OR STEEL COMP 1117 OR STEEL COMP 1118 OR STEEL COMP 1137
flange_width0.116 INCHES MINIMUM AND 0.122 INCHES MAXIMUM IN
overall_length0.412 INCHES MINIMUM AND 0.418 INCHES MAXIMUM IN
style_designatorFLARELESS
seat_angle_in_deg40.0
surface_treatmentCADMIUM OR CHROMATE
casehardening_indicatorNOT CASEHARDENED
end_item_identification2350-01-031-0586
flange_outside_diameter0.750 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN
sleeve_outside_diameter0.711 INCHES MINIMUM AND 0.715 INCHES MAXIMUM IN
material_document_and_classificationFED STD 66, COMP 1118 FED STD 3RD MATERIAL RESPONSE OR FED STD 66, COMP 1137 FED STD 4TH MATERIAL RESPONSE
hose/tube_outside_diameter_for_which_designed0.625 INCHES NOMINAL IN
NSN4730-00-277-9731
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: 108-16510 · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FLANGE WIDTH: 0.116 INCHES MINIMUM AND 0.122 INCHES MAXIMUM IN
•
SLEEVE OUTSIDE DIAMETER: 0.711 INCHES MINIMUM AND 0.715 INCHES MAXIMUM IN
•
SEAT ANGLE IN DEG: 40.0
•
FLANGE OUTSIDE DIAMETER: 0.750 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN
•
HOSE/TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED: 0.625 INCHES NOMINAL IN
•
MATERIAL: STEEL COMP 1213 OR STEEL COMP 1117 OR STEEL COMP 1118 OR STEEL COMP 1137
TECHNICAL CHARACTERISTICS (FLIS)
FLANGE WIDTH0.116 INCHES MINIMUM AND 0.122 INCHES MAXIMUM IN
SLEEVE OUTSIDE DIAMETER0.711 INCHES MINIMUM AND 0.715 INCHES MAXIMUM IN
SEAT ANGLE IN DEG40.0
FLANGE OUTSIDE DIAMETER0.750 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN
HOSE/TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED0.625 INCHES NOMINAL IN
END ITEM IDENTIFICATION2350-01-031-0586
MATERIALSTEEL COMP 1213 OR STEEL COMP 1117 OR STEEL COMP 1118 OR STEEL COMP 1137
OVERALL LENGTH0.412 INCHES MINIMUM AND 0.418 INCHES MAXIMUM IN
SURFACE TREATMENTCADMIUM OR CHROMATE
STYLE DESIGNATORFLARELESS
VERIFIED SUBSTITUTES & CROSS-REFERENCES 19
11640Interchangeable
interchangeable cross-reference
interchangeable
40540Interchangeable
interchangeable cross-reference
interchangeable
360-506Interchangeable
interchangeable cross-reference
interchangeable
1-1561-0750Interchangeable
interchangeable cross-reference
interchangeable
MS39212-4Interchangeable
interchangeable cross-reference
interchangeable
MS39212Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 108-16510?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 108-16510?
108-16510 is a SLEEVE,CLINCH,TUBE FITTING.
What parts can replace 108-16510?
There are 19 known substitutes for 108-16510: 11640, 40540, 360-506 and 16 more. Substitute compatibility should be verified for your specific system.
Is 108-16510 still available?
108-16510 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 108-16510

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026