PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 108-0753
108-0753 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PLUG,TIP is a the manufacturer industrial component. Key specifications include material: CARBON SEALING ELEMENT A, case_style: SHOULDERED, seal_width: 0.645 INCHES MINIMUM AND 0.655 INCHES MAXIMUM IN, finger_type: BANANA SPRING SINGLE FINGER, overall_length: 0.938 INCHES NOMINAL IN, housing_bore_diameter: 1.8760 INCHES MINIMUM AND 1.8775 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-515-4237, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
108-0753
NSN: 5330-00-515-4237
FSC: 5330
CAGE: 77820 — AMPHENOL CORP DIV AMPHENOL AEROSPACE OPERATIONS (USA)
SPECIFICATIONS
materialCARBON SEALING ELEMENT A
case_styleSHOULDERED
seal_width0.645 INCHES MINIMUM AND 0.655 INCHES MAXIMUM IN
finger_typeBANANA SPRING SINGLE FINGER
overall_length0.938 INCHES NOMINAL IN
housing_bore_diameter1.8760 INCHES MINIMUM AND 1.8775 INCHES MAXIMUM IN
sealing_element_styleANGULAR
accommodated_shaft_diameter1.000 INCHES NOMINAL IN
electrical_insulation_featureUNINSULATED
NSN5330-00-515-4237
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 108-0753 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 0.645 INCHES MINIMUM AND 0.655 INCHES MAXIMUM IN
•
HOUSING BORE DIAMETER: 1.8760 INCHES MINIMUM AND 1.8775 INCHES MAXIMUM IN
•
CASE STYLE: SHOULDERED
•
ACCOMMODATED SHAFT DIAMETER: 1.000 INCHES NOMINAL IN
•
MATERIAL: CARBON SEALING ELEMENT A
•
SEALING ELEMENT STYLE: ANGULAR
TECHNICAL CHARACTERISTICS (FLIS)
SEAL WIDTH0.645 INCHES MINIMUM AND 0.655 INCHES MAXIMUM IN
HOUSING BORE DIAMETER1.8760 INCHES MINIMUM AND 1.8775 INCHES MAXIMUM IN
CASE STYLESHOULDERED
ACCOMMODATED SHAFT DIAMETER1.000 INCHES NOMINAL IN
MATERIALCARBON SEALING ELEMENT A
MATERIALCARBON SEALING ELEMENT B
SEALING ELEMENT STYLEANGULAR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
361-2080-000Interchangeable
interchangeable cross-reference
interchangeable
108-0753-001Interchangeable
interchangeable cross-reference
interchangeable
350-100006Interchangeable
Same NIIN cross-reference
interchangeable
DPC1000-46502-1Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 108-0753?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 108-0753?
108-0753 is a PLUG,TIP.
What parts can replace 108-0753?
There are 4 known substitutes for 108-0753: 361-2080-000, 108-0753-001, 350-100006 and 1 more. Substitute compatibility should be verified for your specific system.
Is 108-0753 still available?
108-0753 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 108-0753

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026