PartsTable
Technical Data Sheet

108/08-PP — CLAMP,BLOCK

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

108/08-PP: CLAMP,BLOCK.

The CLAMP,BLOCK is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYPROPYLENE AND STEEL, block_height: 0.98 INCHES NOMINAL0.98 INCHES NOMINAL IN, overall_width: 1.18 INCHES NOMINAL1.18 INCHES NOMINAL IN, overall_height: 1.18 INCHES NOMINAL1.18 INCHES NOMINAL IN, overall_length: 1.40 INCHES NOMINAL1.40 INCHES NOMINAL IN, special_features: SURFACE TREATMENT ZINC(ZINK/NICKEL PLATED), BOLT SIZE: 1.25-20UNCX1-W3. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-695-7221, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
108/08-PP
NSN: 5340-01-695-7221
FSC: 5340 — Hardware, Commercial
CAGE: 53790 — STAUFF CORP (USA)
SPECIFICATIONS
materialPLASTIC POLYPROPYLENE AND STEEL
block_height0.98 INCHES NOMINAL0.98 INCHES NOMINAL IN
overall_width1.18 INCHES NOMINAL1.18 INCHES NOMINAL IN
overall_height1.18 INCHES NOMINAL1.18 INCHES NOMINAL IN
overall_length1.40 INCHES NOMINAL1.40 INCHES NOMINAL IN
special_featuresSURFACE TREATMENT ZINC(ZINK/NICKEL PLATED), BOLT SIZE: 1.25-20UNCX1-W3
style_designatorRECTANGULAR
features_providedW/BOLTW/BOLT
surface_treatmentPHOSPHATE AND ZINC
clamping_hole_diameter0.3125 INCHES NOMINAL ALL HOLES IN
clamping_hole_quantity22
end_item_identificationLIGHT ARMORED VEHICLELIGHT ARMORED VEHICLE
NSN5340-01-695-7221
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 108/08-PP MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CLAMPING HOLE QUANTITY: 22
•
DISTANCE FROM END TO FIRST CLAMPING HOLE CENTER: 0.79 INCHES NOMINAL IN
•
BLOCK HEIGHT: 0.98 INCHES NOMINAL0.98 INCHES NOMINAL IN
•
STYLE DESIGNATOR: RECTANGULAR
•
CLAMPING HOLE DIAMETER: 0.3125 INCHES NOMINAL ALL HOLES IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT1.18 INCHES NOMINAL1.18 INCHES NOMINAL IN
CLAMPING HOLE QUANTITY22
DISTANCE FROM END TO FIRST CLAMPING HOLE CENTER0.79 INCHES NOMINAL IN
BLOCK HEIGHT0.98 INCHES NOMINAL0.98 INCHES NOMINAL IN
STYLE DESIGNATORRECTANGULAR
OVERALL LENGTH1.40 INCHES NOMINAL1.40 INCHES NOMINAL IN
OVERALL WIDTH1.18 INCHES NOMINAL1.18 INCHES NOMINAL IN
CLAMPING HOLE DIAMETER0.3125 INCHES NOMINAL ALL HOLES IN
FEATURES PROVIDEDW/BOLTW/BOLT
SPECIAL FEATURESSURFACE TREATMENT ZINC(ZINK/NICKEL PLATED), BOLT SIZE: 1.25-20UNCX1-W3
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 108/08-PP?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 108/08-PP?
108/08-PP is a CLAMP,BLOCK.
What is the NSN for 108/08-PP?
108/08-PP is cataloged in the U.S. Government catalog under NSN 5340-01-695-7221. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 108/08-PP

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.