PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 107S
107S ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The RESISTOR,FIXED,WIRE WOUND is a the manufacturer industrial component. Key specifications include geared_head_output_shaft_speed_rating: 1.000 SINGLE REVOLUTIONS PER MINUTE SINGLE END. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-144-8659, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
107S
NSN: 3110-00-144-8659
FSC: 3110
CAGE: 38443 — SKF USA INC. (USA)
SPECIFICATIONS
geared_head_output_shaft_speed_rating1.000 SINGLE REVOLUTIONS PER MINUTE SINGLE END
NSN3110-00-144-8659
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 107S · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL OUTER RING
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
•
SURFACE FINISH: GROUND
•
BORE DIAMETER: 35.00 MILLIMETERS NOMINAL MM
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
OVERALL OUTSIDE DIAMETER: 70.00 MILLIMETERS NOMINAL MM
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL OUTER RING
MATERIALSTEEL INNER RING
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
MATERIALSTEEL BALL
SURFACE FINISHGROUND
BORE DIAMETER35.00 MILLIMETERS NOMINAL MM
INTERNAL FIT-UP DESIGNATIONSTANDARD
OVERALL OUTSIDE DIAMETER70.00 MILLIMETERS NOMINAL MM
OVERALL WIDTH10.0 MILLIMETERS NOMINAL MM
LOAD DIRECTIONRADIAL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
406196-1Interchangeable
interchangeable cross-reference
interchangeable
2177Interchangeable
interchangeable cross-reference
interchangeable
FFS92TYPE1STYLE1SInterchangeable
interchangeable cross-reference
interchangeable
12-3HT94Interchangeable
interchangeable cross-reference
interchangeable
107AInterchangeable
interchangeable cross-reference
interchangeable
922546Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 107S?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 107S?
107S is a RESISTOR,FIXED,WIRE WOUND.
What parts can replace 107S?
There are 21 known substitutes for 107S: 406196-1, 2177, FFS92TYPE1STYLE1S and 18 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 107S?
107S is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-144-8659. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 107S

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026